Summary of Contents for Kendall Howard 1918-3-004-F
- Page 1 Save These Instructions for Future Reference ® The Answer is Yes! What’s the Question?™ 48” POWER STRIP Installation Instructions Part Number 1918-3-004-F For Your Safety Read and understand the entire manual before installing Page | 1...
- Page 2 Save These Instructions for Future Reference Dimensional Drawing Specifications Dimensions 48.25” W X 1.86 D X 2” H Weight 6 lb. Outlets Power cord length 14” Surge protection 1,060 Joules Circuit protection 15 amps Color Gray Page | 2...
- Page 3 Save These Instructions for Future Reference Component Identification What’s Included? 48” Power Strip (1) Accessory Bar Mount Bracket (2) Part Number KH-3500 Part Number KH-2501 10-32 x 2” Pan Head Screw (2) 10-32 x 2.25” Pan Head Screw (2) Part Number HW-PHS-005 Part Number HW-PHS-013 Power Strip Frame Bracket (2) 3/8-16 x 1.5”...
- Page 4 Save These Instructions for Future Reference Installation Instructions If mounting to an accessory bar (Figure 1): Step 1: Place the accessory bar mounting brackets onto each end of the accessory bar approximately 44” on center apart, secure bracket with the provided 10-32 x 2” screws. Step 2: Determine which directing the power cable need to be routed, place the power strip into the brackets and install the provided 10-32 x 2.25”...
Need help?
Do you have a question about the 1918-3-004-F and is the answer not in the manual?
Questions and answers