Page 1
OWNER’S MANUAL 3.6V Lithium-ion Shrub Shear With 3.2” Grass Shear & 6.3” Hedge Trimming Blade Copyright All Rights Reserved. Model LSS10163-1 | SKU# 267-3168 TOOL WILL NOT OPERATE WHILE PLUGGED INTO CHARGER. BATTERY MUST BE CHARGED BEFORE FIRST USE. TWO TO THREE INITIAL...
Any part that is damaged should be properly WARNING: Cancer and Reproductive Harm - repaired or replaced. For assistance call our www.P65Warnings.ca.gov. customer service help line at 1-800-633-1501. Model LSS10163-1...
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Model LSS10163-1...
When cutting, move steadily along the line of (32°-100°F). cut, so that stems are fed directly into the cutter After prolonged use, allow the battery to cool blades. down before recharging. After use, install the blade guard. Model LSS10163-1...
Page 6
Push the blade cover plate upward (see fig. 3) until you hear it snap closed. The blade cover plate will be tightened to the unit when it is started. Fig. 4 Oval Slot Oval Slot Fig. 1 Model LSS10163-1...
Check the condition of the cutting edges of the blades, and always immediately remove notches Do not store the tool in places with static and burrs caused by stones, etc. electricity. There are no parts inside the equipment which require additional maintenance. Model LSS10163-1...
The model/ serial number of this tool is found on a plate or label attached to the housing. Please record the serial number in the space provided below. MODEL NUMBER LSS10163-1 ___ SERIAL NUMBER_______________ Always mention the model number when ordering kits/items for this tool.
Page 11
3.6 volt battery packs and chargers. The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from defects in materials and workmanship and agrees to repair or replace any defective product or part for the warranty period as stated above.