Summary of Contents for Palmer Fixture HD-0960/0961-17
Page 1
PALMER FIXTURE COMPANY Hand Dryer Automatic Palmer Fixture Company P.O. Box 10887 Green Bay, WI 54307 1-800-558-8678 www.palmerfixture.com HandDryerSupply.com | 804-859-2498 | sales@handdryersupply.com...
8.07" W x 11.3" H x 7.09" D [205 mm x 287 mm x 180 mm] COVER TYPE/ COVER FINISH HD-0960/0961-17 - Steel; White porcelain enameled coating. (t:1.6 mm) HD-0960/0961-27 - Steel; Matte Black porcelain enameled coating. (t:1.6 mm) HD-0960/0961-09 - Stainless Steel; Satin finish. (t:1.5 mm) Ver.
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer General safety information This product is Disconnect power at intended for installation by a qualified the service breaker before installing or service person. Use 2.0 mm² (AWG NO.14) servicing.
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Installation 1. Make sure power supply breaker is switched off. Installation must be carried out in accordance with the current edition of the local wiring regulations code having jurisdiction.
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Recommended mounting heights Operation - from bottom edge of dryer above finished floor (AFF) No-touch operation. 1270 mm (50") Shake excess water from hands. Woman 1194 mm (47") Place hands under the outlet to start operation.
Page 6
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Diagnostics and Remedies Symptom Corrective Actions for Initial Installation Failures If the dryer will not run First ensure that the breaker supplying the dryer is operational. If it is, disconnect the power and remove the dryer cover.
Page 7
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Diagram HandDryerSupply.com | 804-859-2498 | sales@handdryersupply.com...
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Repair parts list Description Stainless Steel - Satin finish Security hex screw (2 reqd.) Blower housing - Top Motor rubber - Large Motor 110-120Vac 700W Motor 220-240Vac 700W Motor ruber - Small Blower housing - Bottom Heater element 120Vac 700W...