pro user AC2200 Operating Manual page 8

Operating instructions
Compressor function:
1. Screw the air hose onto the compressor.
2. Connect the other side of the hose to the valve.
3. Switch the compressor on/off by pressing "
4. Press and hold " " briefly to select the desired mode.
5. Hold the " " longer to select the desired unit (PSI, BAR, KPA,KG/CM2).
6. Press " + " and " - " to set the correct pressure.
7. Press " " to operate the compressor, the compressor automatically stops when the entered pressure
is reached.
Lighting function:

Press " " to switch on the light (3), pressing "
light. The compressor does not need to be switched on to activate the light.
USB charging function:

You can use the USB-A output (2) for the powerbank function that allows you to charge various devices
with a maximum current of 500mA. The compressor does not need to be switched on to use this
function.
Charging integrated battery:

You can charge the product via the USB-C input (4) with the supplied cable
Warranty:
Pro-User electronics guarantees this product for a period of 1 year from the date of purchase by the
original purchaser. The guarantee is not transferable. The warranty covers only and exclusively
materials. To qualify for warranty service, you must also return the purchased product to the place of
purchase or to the authorised Pro-User electronics dealer together with your proof of purchase. The
warranty is void if the product has been damaged or not used as described in the instructions for use.
The warranty is also void if an unauthorised repair has been carried out. Pro-User electronics gives no
other explicit or implicit guarantee. Pro-User electronics is only responsible for repair or replacement (at
Pro-User electronics' discretion) of the defective product and is not responsible for any consequential
damage or inconvenience caused by the defect.
AC2200
" (1) for 2-3 seconds.
" again can change the mode or switch off the
8