en Installation and connection
Remove the power cable from the
3.
holder.
Remove the 4 sleeves.
4.
Put on the 4 cover caps.
5.
14
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.