Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FOURKAY MX4K44BT-TW
Summary of Contents for FOURKAY MX4K44BT-TW
- Page 1 M 4K44BT-TW 4K/18G 4x4 HDMI/HDBaseT Matrix w/ Audio Breakout...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
-
Page 3: Table Of Contents
Table of Content Introduction ...................... 4 Features ......................4 Panel Descriptions ................... 5 Front Panel ....................5 Back Panel....................7 Remote Control Description ................8 Application Diagram ..................9 Specifications ....................10 Package Contents ..................10 RS-232 Pin Assignment ................. 11 RS232 and Telnet Commands ............... -
Page 4: Introduction
Introduction The MX4K44BT is a HDMI/HDBaseT matrix which can routes four Hi-Def sources to any four HDTV displays, supporting 1080p Full HD up to 4K@60Hz HDR plus all 3D formats, along with multichannel digital audio formats such as Dolby® True HD and DTS- Embedded audio extractors can extract the audio and output via L/R or Coaxial. -
Page 5: Panel Descriptions
Panel Descriptions Front Panel 1. LCD display---Shows the status of input-output selection, EDID info and so on. 2. IR receiver window----Receives the IR from the remote control of the HDBaseT-4x4Matrix. 3. Power LED indicator---Indicates the power status for the matrix. 4. - Page 6 D1024 D1024=DVI 1024 x 768 D1080 D1080=DVI 1920 x 1080 D1200 D1200=DVI 1920 x 1200 OUT1 OUT1=Copy OUTPUT1 EDID to INPUTx OUT2 OUT2=Copy OUTPUT2 EDID to INPUTx OUT3 OUT3=Copy OUTPUT3 EDID to INPUTx OUT4 OUT4=Copy OUTPUT4 EDID to INPUTx 8. Up selection button--- Press to change a 9.
-
Page 7: Back Panel
Back Panel 17. L/R in 3.5mm Analogue audio input for embedding audio onto HDMI outputs. 18. IR inputs 1 to 4--- 3.5mm stereo phone-jack, connect to an IR receiver 19. IR outputs 1 to 4 --- 3.5mm mono phone-jack, connect to an IR transmitter cable. 20. -
Page 8: Remote Control Description
Remote Control Description A. OUTPUT-X select INPUT-Y: 1. Press OUTPUT-X (X = outputs1 to 4 ) Press INPUT-Y ( Y = inputs 1 to 4 ) 2. Press OUTPUT-X (X= outputs 1 to 4 ) press the left and right arrow buttons to select the input. -
Page 9: Application Diagram
Application Diagram Note: There is three IR Control Modes 1. Via IR extension to control the matrix using matrix remote control 2. Via IR input cable on HDBT Receiver and IR output cable on matrix to return control the DVD. 3. -
Page 10: Specifications
32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to 140°F(-20°C to 60°C) Power Supply 24V/3.5A DC Package Contents 1x MX4K44BT-TW 1x 24V/3.5A DC Power Supply 1x Power Cord 1x Master Remote Control 4x IR Transmitter 5x IR Receiver 1xRack-mount kit... -
Page 11: Rs-232 Pin Assignment
RS-232 Pin Assignment MX4K44BT-TW DCE) Remote Control Console (DTE) Assignment Assignment Baud Rate: 57600 bps Data Bits: 8-bit Parity: None Stop Bit: 1-bit Flow Control: None NOTE: Use a Straight Through DB9 Cable to connect the matrix with a computer, DO NOT... -
Page 12: Rs232 And Telnet Commands
RS232 and Telnet Commands Command Action Print Help Information HELP Print Help Information STATUS Print System Status And Port Status Power On, System Run On Normal State POFF Power Off, System Run On Power Save State Power Deep Off Mode Control For "POFF"... - Page 13 zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD zz=03: HDMI 1080i@60Hz, Audio 2CH PCM zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY zz=05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD zz=06: HDMI 1080p@60Hz/3D, Audio 2CH PCM zz=07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY zz=08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD zz=09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY...
- Page 14 mm=OFF: Mute Off yy=00: Select All Output Port yy=[01...04]: Select One Output Port AUD RX xx ORG Input Port:xx Use Orginal Receive HDMI/DVI Signal AUD RX xx ANA Input Port:xx Embeded Analog L/R To HDMI/DVI Signal AUD RX xx AUTO Input Port:xx Embeded Analog L/R When DVI Signal,mm=ON: Mute On mm=OFF: Mute Off yy=00: Select All OUTPUT Port...
-
Page 15: Gui Control
GUI Control Microsoft Windows Operation System The HDBaseT4x4 Matrix software controller is green software.Simply 4x4 HDMI your PC which is used to control the Matrix by connecting an RS232 COM or TCP port to complete the installation. Connect the PC and Matrix with the included RS232 cable or UTP cable Power up Matrix (It will take approx 5 seconds to be ready with a Click to select tab page COM port or TCP connect status... - Page 16 Select control mode: RS232 COM mode (Auto COM ports detected) or TCP mode List detected COM ports List all Matrix devices after search operation Click to search all Matrix devices that connected in same subnet Click to configuration Click to connect or disconnect the PC and Matrix ( Connection will be established automatically before the control commands transmit ) Click to refresh the device status: include device information displayed in area and...
- Page 17 Click the Config button to show the TCP configuration window. Set the tag to identify Matrix device Set IP mode: Subnet should support DHCP protocol when set Auto IP mode, then Matrix device will obtain IP automatically. Otherwise, set Static IP mode and designate a useable IP for Matrix device Set IP address, not editable when Auto IP mode selected.
- Page 18 Input port tags Click to edit Input port tags Output port tags Click to edit Output port tags NOTE: Edit boxes are read only, click the to edit the tags in the pop up window . One set of Input/output port tags can be set for the Matrix device when the COM control mode is selected.
- Page 19 After action of , edit form will pop-up as below: Define tags for respective Input port, then devices connect the Input ports can be easily remembered. the tag that you want to delete, if a tag is still used by any other Input port, the delete action will be discarded.
- Page 20 LED displays the Input number for respective Output port Click to select the Input port for the respective Output port Click to select previous or next Input ports for the respective Output port Displays the IN/OUT with tag information when a mouse moves cursors over buttons Pre-Setting items: Default is Port to Port Click to edit selected pre-setting item...
- Page 21 When the are on The and the Input/output port tag has been defined, tag messages will pop up like this: When the mouse cursors over the setting buttons right click the mouse and the menu will pop up like this: All Outputs: All Outputs from the same Input the current Output (right click the mouse) and the next x-1 ( x range is from 1 to 4, set total x Outputs at the same time )all Output(s) from the same Input...
- Page 22 After the action of , the edit output form will pop-up below: Pre-Set name Set all Output ports from the same Input Select the Input for the respective Output...
- Page 23 Set the EDID mode for the selected Input port or All Input ports, click the complete the action. NOTE: When setting User1/User2 EDID mode, download the EDID content to the User1 Memory/User2 Memory first. The User1/User2 default EDID content is 1080p, Stereo Audio 2.0.
-
Page 24: Maintenance
To enable or disable the IR control functions. When the box is checked the IR control functions are enabled, otherwise the IR control functions are disabled. This setting is not memorized. IR control function is always enabled after power up. Click to ope Firmware upgrade progress Click the button to upgrade the firmware.
Need help?
Do you have a question about the MX4K44BT-TW and is the answer not in the manual?
Questions and answers