SAFETY INSTRUCTION Thank you for purchasing this fan. This product has passed through extensive quality assurance process. Every care has been taken to ensure that it reaches you in perfect condition. Attention! When using electric tools, basic safety precautions should be followed to reduce the risk of fire,electric shock and personal injury, including the following, Read all these instructions before operating this product and keep these instructions for easy reference.
NOTE: There are no serviceable parts in this unit. Do not attempt to disassemble. WARNING: Never use this fan with any solid-state speed control device. Doing so will create fire and/or shock hazards. APPLIANCE COMPONENTS Top Control Panel Remote Receiver LED Display Handle Back Cover...
5. Screw the base assembly onto the pedestal tube with the supplied 4pcs of screws. 6. Position the power cord into the provided cord track in the rear base. 7. Turn the tower fan back to upright position after assembled. It is now ready for use. Fan body Base The two bases with a pedestal...
5. OSC: Press the OSC button to allow the Fan to oscillate the wind direction. To stop the oscillation, press the button again. The maximum angle is 70°. 6. ION: The Ionic function can only be selected from the remote controller. Press ION buttom to operate with ionic air purifying function or press button 3-5seconds of control panel to start the Ionizer for air purification..
(WEEE). By disposing of this product correctly, you can prevent negative consequences for the environment and for human health, due to the presence of potentially hazardous substances in the product. TECHNICAL DATA Model No. CTF38 Power supply: 220-240V~ 50/60Hz Power: 45W Product Dimensions: 315 x 315 x 960mm (with base) Net Weight: 3.30kg...
Need help?
Do you have a question about the CTF38 and is the answer not in the manual?
Questions and answers