anko Sand Pit 43-158-942 Instruction Manual

Sand Pit
Instruction Manual
SENSORY
& TACTILE
EASY TO INSTRUCTIONS MAXIMUM
ASSEMBLE INCLUDED NUMBER OF
CHILDREN
Keycode: 43-158-942
IMPORTANT – READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
THIS PRODUCT. FOLLOW ALL INSTRUCTIONS TO PREVENT INJURIES AND ENSURE
PROPER MAINTENANCE.
WARNING:
• This product must be assembled by adults before use.
• Assembly requires at least TWO adults.
• Always inspect product thoroughly before each use.
• Remove all packaging before use.
• Leave all assembly parts away from children.
• Recommended to apply proper protective coating (not included) on all surfaces of this product for
outdoor use.
• Manufacturer cannot assume responsibility for incorrect use or misuse.
• Dispose of this product responsibly.
• Colour and content may vary from illustration.
• The screw bag contains small parts and sharp points. Keep away from children.
• Do not sit or press firmly on the sandpit.
• Wipe clean the internal ground sheet and covering sheet before each use.
• Keep away from fire. Never allow a naked flame near this product.
• Always cover the sandpit when not in use, to prevent unwanted animals from playing in the sand.
Retain this instruction manual and packaging for future reference
MANUFACTURED FOR:
AUXO INTERNATIONAL LIMITED
55 HOI YUEN RD, KWUN TONG, HK, CHINA.
×2
Approximate MADE IN CHINA
Assembly Time
1 1
Important advise for assembly, safe use, maintenance and
supervision

Age and Usage:

• For domestic use only.
• For outdoor use only.
• This product is intended for use by children ages 18+ months.
• Use by children under 18 months of age or heavier weight may result in entrapment
and serious injury.
• Adult assembly required.
• Children must not use this product in any way until it is properly assembled and
inspected by adults.
• Maintain this product properly and periodically to keep it in a safe condition for
children.
• Anchor, store away or restrict this product from use under severe weather
conditions.
apply force evenly around the frame and move horizontally. Remove all
attachments including water, sand or toys before moving. Inspect this product
thoroughly after moving.

Assembly:

• This product must be assembled by adults exactly in accordance with the
instructions.
• Make sure all components and parts are in place. Check them with the part list in
this manual.
• Some wooden components may occasionally twist, warp or crack in a small degree.
This is normal.
• DO NOT use any wood piece if it is not in good condition for assembly and not safe
to use.
• Contact the retailer for a replacement part.
• Sort and install all components and parts according to sizes.
• Use proper tools and protective gloves for installation.
• Make sure all bolts and nuts are tightened correctly, no over-tightening or loose
parts.
• If a bolt thread protrudes beyond the wood surface, replace the bolt with a shorter
one that will not protrude.
• This product must be installed on level ground with a soft impact surface like grass.
• NEVER install this product on any slope, gravel, asphalt, packed earth, hard impact
surface or other unsafe surfaces. It is recommended to install protective surfacing
to imitate soft impact surface 2 metres in all directions beyond this product.
• Place this product in a location at least 2 metres away from any structure,
obstruction, road or driveway. Keep this product free from electrical wires,
branches, rocks, or any other objects that could endanger children's safety.
• Avoid assembling or locating this product in full sun or other severe weather conditions.
2

Play Supervision:

• Always maintain legibility of warning statements on this product.
• DO NOT allow children to use this product in manners other than intended.
injury or death.
• Wear proper clothing and shoes when playing.
• Some parts may become extremely hot when exposed to sunlight. Always check for
extreme heat before allowing children to use this product.
• DO NOT allow pets or other animals near this product to prevent damage or injuries.
• All wood and other parts are subject to normal wear. Always check and ensure
all wood and parts are secured, stable and in good condition before use.
• Pay special attention to all connections and fastening.
• DO NOT use this product if any bolts or nuts are missing or loose, or wood is not
in good condition. Always seek for appropriate replacement materials.
• DO NOT attach items to this product that are not specifically designed for use with
this product.
• DO NOT use this product under severe weather conditions.
• NEVER place this product near fire.
apply force evenly around the frame and move horizontally. Inspect this product
thoroughly after moving.

Maintenance:

• It is recommended to apply multiple layers of wood sealers such as paint, stain,
lacquer or outdoor oil before assembling this product for the first time.
• After installation, a follow-up inspection should take place after one week and twice
a month during play season.
• Rub down splinters and rough surfaces with sandpaper and repair sharp points if
needed. Apply wood sealer to the repaired part.
• Depending on weather conditions and the type of wood sealer used, applying wood
sealer again to all wood components is essential at regular intervals. Please consult
your local hardware or home improvement store for recommendation.
• Maintenance should be performed at anytime deemed necessary. Major
maintenance on wood finishing should be performed at least every six months.
• Checks and maintenance of main parts (crossbeam, anchors, etc.) should be
performed at regular intervals. If these checks are not carried out, this product
could overturn or otherwise become a hazard.
• It is important, at regular intervals and beginning of each season, to check all nuts
and bolts for tightness. Tighten them when required. Check all coverings and bolts
for sharp edges. Replace them when required.
3

Recommended Safe Play Area

This safe play area should be 2 metres in
all directions beyond the product.
2.5m
This area must be free from all
structures, obstructions,
roads or driveways.
2m
2m
2m
2m

Product Dimensions

IMPORTANT!
DO NOT over-tighten the parts or leave
Assembly sizes may vary due to thermal expansion
them loose. Screws should be tightened
and assembly accuracy.
just enough to hold the parts together.
100cm

Tools Required for Assembly (Not Included)

Pre-drilled hole has 2 sides. Drill from the
larger hole side.
Electric Drill with Cross Head Drill Bit
(Recommend longer drill bit for 50mm bolts) Cross Head Screwdriver
Pencil, Pen or Marker Tape Measure Working Gloves
4