How To Use; Single Shot - DUDEPRUNER THE FUZZ GUN 2.0 User Manual

HOW TO USE

How To Use
The Fuzz Gun 2.0 has 3 modes of operation; Single Shot, Glide, and Full Auto. It also has Snow Balls™ Ice Cooling
Technology which cools down the treatment head around the flash window to between 0 - 5°C. This helps dissipate any heat
from the flash bulb, giving you a gentle, pain free hair removal experience. The flash window also has a contact sensor which
must be covered for the flash bulb to fire. If you are having trouble getting your Fuzz Gun to fire, simply adjust the position of
the treatment head to make sure the flash window is fully covered.

Single Shot

When you turn on your Fuzz Gun 2.0, it will be in single shot mode. This means when you press the flash button, you will get a
flash of light from the flash window, as long as the flash window is sufficiently covered. This mode can be useful for smaller
areas such as underarms or your prized family jewels.
Glide
Glide mode occurs when you keep hold of the flash button and keep the treatment head in contact with your skin. The flash
bulb will continue to fire as you hold the flash button and glide the handset across your skin.
Full Auto
Full Auto mode will continuously fire the flash bulb, without you having to hold any buttons, as long as the contact sensor
within the flash window is covered. To activate Full Auto Mode, press and hold the cooling button for 2-3 seconds while being
sure that the flash window is uncovered to avoid unintentionally firing the Fuzz Gun 2.0. Flashing will begin as soon as you
then make contact with your skin. Full Auto Mode is well suited for large treatment areas such as your legs, chest, or back.