Page 1
Allan Smartbox User Manual Art.nr. 480021...
Page 2
Warning 1. Make sure the power supply is DC 12V only; 2. Don't ever disassemble or repair under any circumstances; 3. When the lamp is not used for a long time, please disconnect the power supply; 4. Do not overload the circuit, otherwise it may cause electric shock or fire.
b. Open the APP, click “Sign Up” and create your account according to the prompt. Select Region Mobile number/Email 2.Fixture Connection Note: a. Make sure the fixtures are blinking after power on, either fast or slow, if not, power ON/OFF the Smart box by 3 times till you see the blink.
Page 4
EZ Mode(Easy-Connect Mode) Click “+” at the “Lighting Source “Lighting” home page (BLE+Wi-Fi)” If you could see the rapid blinks from the connected fixtures, click “Confirm the light is blinking rapidly” →“Next”; If not, reset by turning Off/On by 3 times till it appears.
Page 5
Enter your WI-FI and password, click “Next”. Note: Only 2.4 GHz network are supported. Click “Done” after the connecting process is completed, now the fixtures are added successfully.
Page 6
AP Mode (Access Point Mode) Click “+” at the “Lighting Source “Lighting” home page (BLE+Wi-Fi)” Click “AP Mode”→“Confirm the light is blinking slowly”→“Next” . If you see the rapid blinking instead of slow ones,reset to AP mode by turning OFF/ON 3 times.
Page 7
Enter your WI-FI name and password, click “Next”, you'll see the hotspot named “Smartlife-XXX” generated from the Smart box, click “Go to Connect” . Note: Only 2.4 GHz network are supported. Go back to TUYA app, click “Done” after the connection process is completed.
Page 8
3.Edit Timer Click on the Clock icon after the fixtures are added successfully, then you can add your schedule to decide when to turn ON/OFF of your fixtures.
Page 9
Allan Smartbox Elektro Elco AB Tallvägen 5, SE-564 35 Bankeryd, Sweden info@elco.se, www.llitt.com...