ProMobility M28 Harness User Manual

4. . Adjusting the Webbing
To Tighten Straps
To Extend Straps
Simply pull the tail-end of
To release the webbing, you
the webbing straps.
need to squeeze the Adjuster
The Adjuster will lock the
whilst pulling on the lower
webbing into position. webbing strap.
'Press to Release Buckle'
Code: M28
A simple press to release buckle
which can be used by the passenger.
5. Spare Parts:
Promobility Ltd.
Unit A3, Airside Enterprise Centre,
Airside Business Park, Swords,
Co. Dublin, K67 YY94, Ireland.
Tel: +353 (1) 8900890
Email: sales@promobility.ie www.promobility.ie
'Steel Safety Buckle'
Code: M28SB
When fitted to our harnesses as an alternative to
the standard 'quick release' buckle.
It helps prevent those passengers with inquisitive
fingers, challenging behaviour or learning
difficulties from releasing the harness buckle.
Webbing Tri-glide
Promobility M28 Harness
It is important to read and understand this guide before installation and use of
the M28 Harness, this will help ensure its optimal use and performance.
The M28 Harness is designed for use as a postural support harness in a vehicle.
The M28 Harness is not a safety belt, and you MUST ensure that it is used only
in conjunction with the vehicles seat belt system for the user's safety.
The M28 Harness is NOT a safety belt, but a fixation belt to ensure the users
proper location on the seat.
Do not use the M28 Harness for any other purpose than described, warranty is
only valid with correct use.
1. How to Use
2. Maintenance
3. Warranty
4. Adjusting the Webbing
5. Spare Parts
User Guide