Table of Contents
Advertisement
en Basic settings
Basic setting
Water connection
Eco forecast
Emotion Light
Front display
Start programme
Tone volume
Button volume
Wi-Fi
Remote Start
1
Factory setting (may vary according to model)
38
Selection
1
Cold water
Hot water
on
1
off
off
On via main
1
switch
On on opening
door
1
on
off
1
Eco 50°C
Last programme
Scale with multiple
levels.
Scale with multiple
levels
on
off
off
Manual
Permanent
Description
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Switch the front display on or off.
Set a default programme for when the
appliance is switched on.
Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Set the button volume during opera-
tion.
Level 0 switches the button tones off.
Switch the wireless network connec-
tion on or off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connected
to the Home Connect app.
→ "Home Connect ", Page 39
Activate or deactivate
→ "Remote Start ", Page 40.
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→ "Home Connect ", Page 39
Advertisement
Table of Contents
