Summary of Contents for Gamma Starburst PixBar
- Page 1 Starburst PixBar 18x10w RBGW LED Wash Striplight User Manual Starburst Pixbar – GAMMA LED Vision Page 1 of 14...
-
Page 2: Table Of Contents
Mounting and Operation........................3 Safety Precautions..........................3 Customer Support..........................5 2. Setup and Operation..........................6 Menu Operation............................6 DMX Setup..............................7 DMX Basics............................7 DMX Wiring............................7 DMX Modes and Configuration......................8 3. Maintenance............................11 Troubleshooting Problems......................11 4. Technical Specifications........................12 5. Photometrics:............................13 Starburst Pixbar – GAMMA LED Vision Page 2 of 14... -
Page 3: Introduction And Setup
1 pc Mounting and Operation Use clamps rated for the full weight of the Starburst PixBar to hang the fixture from the mount(s) on the fixture’s feet. As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using one of the safety cable foot attachment points as a safety point. - Page 4 ∙Warranty is voided if there are any malfunctions from not following the user manual while operating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. Allow the Starburst PixBar LED to cool for at least 15 minutes before handling after use. Starburst Pixbar – GAMMA LED Vision...
-
Page 5: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. -
Page 6: Setup And Operation
Set the DMX Channel Mode CH72 Choose a stand-alone program N000 N001-N126 from 126 different options :) Choose a stand-alone program E000 E001-E255 from a second set of 255 options :) Starburst Pixbar – GAMMA LED Vision Page 6 of 14... -
Page 7: Dmx Setup
32 Fixture Rule – DMX only allows you to connect up to 32 fixtures in a single daisy chain for signal strength. Sometimes, depending on the fixtures and cable length, this number is less (or more). Starburst Pixbar – GAMMA LED Vision Page 7 of 14... -
Page 8: Dmx Modes And Configuration
Please see illustrations below: DMX Modes and Configuration The Starburst PixBar has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or op- tions but take up more of your output channels on your lighting console or soft- ware. - Page 9 The 4, 8, and 72 Channel modes offer full RGBW control over different segments of the Starburst PixBar. The 72 channel mode is simply 18 pixels with RGBW (4 chan- nel) control – perfect for pixel mapping! The 26 channel mode is white-only and features control of each segment, but only at full white.
- Page 10 Blue Cells 0-255 Blue Control for each 11, 71 pixel of the light, 1-18 4, 8, White 0-255 White Control for each 12, 72 Cells pixel of the light, 1-18 Starburst Pixbar – GAMMA LED Vision Page 10 of 14...
-
Page 11: Maintenance
Plug the light directly into the DMX controller with a cable that you know is • good. Unplug all other lights – does it work? Try to use another DMX controller. • Starburst Pixbar – GAMMA LED Vision Page 11 of 14... -
Page 12: Technical Specifications
Flicker-Free on Camera Control Mode: DMX512 control, Auto Run IP Rating: IP 44 Product size: 38.5” x 5.5” (on feet) x 3.5” Weight: 9 lbs Starburst Pixbar – GAMMA LED Vision Page 12 of 14... -
Page 13: Photometrics
5. Photometrics: Center-point measurement at the center of the beam. Distance Full Brightness in FC (RGBW) 5’ 10’ 15’ 20’ 25’ 30’ Starburst Pixbar – GAMMA LED Vision Page 13 of 14... - Page 14 TM-30: CRI: Starburst Pixbar – GAMMA LED Vision Page 14 of 14...