Table of Contents
Advertisement
Accessories
Product Description
The KV552 V-blade is designed for the sole purpose of snow removal and moving loose materials. The KV552
V-blade is an excellent tool for snow removal with all the capabilities of a conventional blade, plus the added
versatility of sweeping both wings back for single pass clearing of sidewalks or sweeping both wings forward
to clear large areas without the need for repeated cleanup passes.
Each blade wing can be angled forward or backward 30 degrees using the power unit's secondary SDLA lever.
The angle of each wing is controlled independently with a 12 volt electro-hydraulic valve activated by a switch
on the power unit. The power unit must be equipped with a 12 volt front plug kit*.
*Check with your Ventrac dealer or the Ventrac website to find the correct kit for your power unit.
Why Do I Need an Operator's Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely operate and
maintain your machine, and to avoid injury and product damage. It is divided into chapters for convenient refer-
ence of the appropriate information.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. If this manual
becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac dealer for a
replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may
result in personal injury and/or damage to the equipment.
INTRODUCTION
Venture Products Inc. is pleased to provide you with your new
Ventrac KV552 V-blade! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac
dealer for a complete list of items available for your new KV552
V-blade.
Item Description
Snow Containment Belt Kit
6 inch Extension with 6 inch Top Flare Kit
6 inch Straight Edge Extension Kit
Polyurethane Cutting Edge Kit
Introduction - 4
Part Number
70.8044
70.8046
70.8047
70.8048
Advertisement
Table of Contents
