Page 3
The tank of your spreader is pre-drilled to accommodate the T- Box, simply enlarge the 4 central holes of the tank to 3 / 3.5mm (see diagram page 4) The socket for the T-Box battery must be on the screen side of the T-Drop. Manual_T-Box_EN_V1...
Page 5
Connection : - - Connect the spreader plug to the T-Box. - For the power supply of the T-Box you have two options: • Connect a 5V power supply (2amps mini) to the "5V In" input which is located next to the spreader's socket.
Page 6
Menu : Main page : When you start your T-Box remote control, the screen displays the Skyinnov logo for a few seconds and then you arrive on the main page: - Long press Down button=> On / Off (the remote control cannot be turned off if the spreader is running) - Long press right button=>...
Page 7
GPS page : - Long press Down button=> On / Off - Long press right button=> next page Short press right button=> next value - Long press left button => previous page Short press left button=> previous value Available settings: - 1 ball every 5 metres - 1 ball every 10 metres - 1 ball every 15 metres...
Page 8
Timer page : - Long press Down button=> On / Off - Long press right button=> next page Short press right button=> next value - Long press left button => previous page Short press left button=> previous value Available settings: - 1 ball every 0.5 second - 1 ball every 1 second - 1 ball every 2 seconds...
Page 9
Configuration : To work with the T-Box, your T-Drop spreader must follow this configuration: ARM : off DROP mode : I/0 Manual_T-Box_EN_V1...
Need help?
Do you have a question about the T-Box and is the answer not in the manual?
Questions and answers