Download Print this page

Dormont OneFlow OF817-8H-B Series Installation, Operation And Maintenance Manual

Hot water systems, anti-scale system chemical-free, salt-free scale prevention

Installation, Operation and

Maintenance Manual

FOR COMMERCIAL FOODSERVICE EQUIPMENT

Series OF817-8H-B Hot Water Systems

OneFlow

Anti-Scale System

Chemical-Free, Salt-Free Scale Prevention

Introduction

The Dormont OneFlow

intended primarily for use with commercial dishwashers. In this

application they are installed between the hot water supply and the

booster heater in the dishwasher. There may be other hot water

applications for OneFlow Hot Water Systems where the feedwater

temperature is between 100°F (38°C) – 150°F (66°C).

Dormont OneFlow will reduce or illiminate scale formation in the

booster heater as well as reducing spotting and streaking normally

associated with hard water.

A Watts Product Available from:

Anti-Scale Hot Water Systems are

OF817-8H-B

Table of Contents

Do you have a question about the OneFlow OF817-8H-B Series and is the answer not in the manual?

Page 1 OneFlow Hot Water Systems where the feedwater temperature is between 100°F (38°C) – 150°F (66°C). Dormont OneFlow will reduce or illiminate scale formation in the booster heater as well as reducing spotting and streaking normally associated with hard water.
Page 2 Hot Water System Overview Figure 1. Tank Head Bypass Valve IN - Hot Water (100°-150°F) (Shown in Bypass Position) OUT - OneFlow Treated Water ® Media Tank Cautions! Equipment Speciﬁcations OneFlow systems are complete, self-contained, loaded with media ® and ready to use. A simple inlet and outlet connection is all that is required for installation.
Page 3 Installation 1. Place the system in the desired location. Ensure adequate 4. Place a bucket under the outlet port or run a line from the clearance so the the bypass valve can be operated when outlet port to a drain. necessary.
Page 4 You should consult applicable state laws to determine your rights. SO FAR AS IS 6015 Enterprise Drive, Export, PA 15632 1-800-DORMONT • FAX: 724-733-4808 Manufactured by Facility #1, USA Plano, TX 75074 DM-1327, Rev.