Warm4Less White Onyx Instruction Manual

WHITE ONYX
AND
BLACK ONYX
Models: 'White Onyx' and 'Black Onyx'
6 Interval Time and Temperature Controllers with Manual Override
Both the 'White Onyx' and 'Black Onyx' Controllers offer iden�cal controllability and features.
This manual guide covers both units, however certain symbols are different on each unit, but these are clearly men�oned throughout the
manual for your benefit. The controller's default se�ng is 6-�me periods each week-day and op�onal 2-�me periods at weekends. Please note,
this icon shows as below on the touch screen model of this controller.
Features:
� Large LCD display with backlight screen with double temperature readings
�
Consump�on - <0.3KW
� 6 Period programmable controlled se�ngs
�
NTC probe sensor compa�ble
� Size: 86*86*17mm (H*W*D)
�
Set point temperature: 5 Degrees to 99 Degrees
� Set point temperature range: 5 Degrees – 60 Degrees
�
Capacity – 12/16Amp (230V) (3000w)
When starting the unit up for the first time:
1.
To turn the unit on click on bo�om le� hand 'Power' bu�on
2.
Press the clock bu�on and set the �me by using the + and – bu�ons.
3.
To set the days throughout the week, press the 'Arrows/'Book' button, and then press the + button to display 1,2,3,4,5. Currently
1,2,3,4,5 represents Mon-Fri setting.
Press the + bu�on twice to change to the 1,2,3,4,5,6 for Mon-Sat control, and press the + bu�on three �mes to change to 1,2,3,4,5,6,7 for
Mon-Sun control.
4.
The present �me interval is showing by an icon top right. The units default set up is as below:
1
01205 821 796
Programmable Room Controllers
Control Manual Guide
www.warm4less.com
INSTRUCTION
MANUAL
office@warm4less.com