Subscribe to Our Youtube Channel
Related Manuals for IKA IKA-LEXINGTON
Summary of Contents for IKA IKA-LEXINGTON
- Page 4 IKA-MUNICH IKA-DRESDEN 288W 1600 1800 70dB 70dB IKA-MUNICH IKA-DRESDEN...
- Page 6 IKA-MUNICH IKA-DRESDEN Inner chimney Inner chimney Outer chimney Outer chimney Switch control board Glass panel Switch control board Glass panel Hood assembly LED light Oil collector Oil collector Hood assembly LED light Filter...
- Page 8 IKA-MUNICH Anchor Screw Hang strip Exhaust pipe Air outlet Position: Hang strip installation: Find out the fixed place and drill 4 holes with diameter of 10mm Insert 4 anchors into the holes and tighten the IKA-DRESDEN and 60mm depth. hang strip with screws.
- Page 10 IKA-MUNICH IKA-DRESDEN...
- Page 11 IKA-MUNICH & IKA-DRESDEN LED light Stir-fry/speed On/off/delay Sensor zone-Right Sensor zone-Left Heat clean Sensor by gesture a). When hood is on standby, move hand from left to right, to start up the cooker hood with light on. b). When hood is working, move hand from right to left, to shut up the hood.
- Page 12 (For model IKA-NESTON, IKA-MUNICH and IKA-DRESDEN) Activated Carbon for Option lf using activated carbon for IKA-NESTON, please take down the chimney cover,then put the buckle of activated carbon aiming to nutson the cabinet, push it in a counter-clockwise direction,till the carbon panel is fixed well.
Need help?
Do you have a question about the IKA-LEXINGTON and is the answer not in the manual?
Questions and answers