Advertisement
Quick Links
Advertisement
Summary of Contents for KEMMLIT SKIRMETT Hive Lock
- Page 1 Hive Lock...
- Page 2 Hive Lock Product Overview...
- Page 3 Hive Lock Technical Drawing...
- Page 4 Hive Lock RFID Cards...
- Page 5 Hive Lock Management Card Functions: o Authorise and Delete Master cards. o Allow read lock status and events.
- Page 6 Hive Lock Master Card Functions: o Inspection opening mode o Delete User cards. o Reset User cards ( back to blank function ).
- Page 7 Hive Lock Multi-User Card Functions: Open / Close Locker...
- Page 8 Hive Lock Operating Instructions...
- Page 9 Hive Lock Master Card - Operating Instructions Inspection Mode Step 1 Present the Master card (ONLY ONCE) to the lock and wait 5 seconds. After a long beep the lock will open automatically for 30 seconds. After 30 seconds the lock will return to the close positon. The User Card is not deleted during this Inspection Mode...
- Page 10 Hive Lock Master Card - Operating Instructions Delete User Card Step 1 Present the Master card four times to the lock and wait 5 seconds. You will hear four short beeps and the User Card will be deleted. At the same time the lock will automatically open. The lock is back in the reset mode, ready for a New User.
- Page 11 The Hive Master Card - Operating Instructions Reset User Card Step 1 Present the Master card five times to the lock and then present the User Card. You will hear five short beeps as you present the User Card. The User Card will be reset.
- Page 12 Hive Lock User Card - Operating Instructions The Locker is not occupied and the shoot bolt is inside the lock. Step 1 Present the User Card to the Lock User Card OK - Long Beep Not OK – 3 Beeps...
- Page 13 Hive Lock User Card - Operating Instructions The shoot bolt will extend out, moving to the locked position. Step 3 The Lock is ready to close and secure the locker shut Step 4 You can now close the locker door Please Note: The Hive and User card are now linked The User card will not open or close another lock whilst it is linked to this Hive...
- Page 14 Hive Lock Battery Information...
- Page 15 Hive Lock Battery Replacement Batteries replacement To release the battery holder turn the T20 screw. PRESS the screw’s head till the battery holder rises out. Once the batteries have been replaced, push the battery holder Torx T20 back into position and tighten the screw. 2 x CR123A...
- Page 16 Hive Lock Battery Level Warning beep The lock emits beeps repeatedly and does not close. beep The battery level is very low and needs to Be replaced before it will function correctly. beep Please replace the battery.
- Page 17 Thank you for your attention...
Need help?
Do you have a question about the SKIRMETT Hive Lock and is the answer not in the manual?
Questions and answers