Labtech MultiVap 54 User Manual page 9

Fix the exhaust pipe to the
exhaust port on the back side
of the instrument by the
provided metallic clamp.
4
Connect the other end on the
laboratory exhaust line
Connect the nitrogen inlet
connector to the gas source
through a 6mm gas tube
5
Connect the plug to the
electric socket
6 Switch ON the unit
Move down the needle plate
by the Manual Needle Level
7
Control button on the right
side of the instrument
Unscrew the six red head
screws and fit the two ends of
8 nitrogen needle channels into
each line
MultiVap 54 – User Manual
9