1. Manuals
  2. Brands
  3. Jack Manuals
  4. Sewing Machine Accessories
  5. 6040-D
  6. Operation instruction manual

Jack 6040-D Operation Instruction Manual

Automatic sewing control system, human machine interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Automatic Sewing Control
System
Operation Instruction
(Human Machine Interface)
October 2014, Version V3.1
©All rights reserved Shenzhen Xing Huo CNC Co., Ltd.

Advertisement

Table of Contents
loading

Summary of Contents for Jack 6040-D

  • Page 1 Automatic Sewing Control System Operation Instruction (Human Machine Interface) October 2014, Version V3.1 ©All rights reserved Shenzhen Xing Huo CNC Co., Ltd.

  • Page 2: Table Of Contents

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Table of Contents Chapter I Introduction to Control System..............4 1.1 Overview............................4 1.2 Functional Description......................... 4 1.3 Notes.............................6 1.3.1 Safety Instruction........................6 1.3.2 Work Environment........................7 1.3.3 Power Supply Requirement....................7 1.3.4 Grounding Requirement....................... 7 Chapter II Main Interface Specification...............
  • Page 3 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 4.13 Insert Functional Code......................36 4.14 Save File........................... 37 Chapter V Modify File....................39 5.1 Main Interface of Modify File....................39 5.2 Add Needle Point........................41 5.3 Delete Needle Point........................42 5.4 Forward and Backward Reinforcing..................

  • Page 4: Chapter I Introduction To Control System

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter I Introduction to Control System 1.1 Overview Thank you very much for using the automatic template sewing machine control system of our company! This system can match with the various types of template machine, satisfying different sewing requirements with satisfactory sewing effect for all sorts of cloth! Before using, please read the Instruction carefully to ensure the correct use of this system.
  • Page 5 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System (3) Precise motion control technology with efficient sewing  Using international advanced DSP chip, fast system run speed, high hardware integration, stable performance  Support step-by-step, closed loop step-by-step, brushless DC, servo drive, using smooth curve for speed governing, smooth operation ...

  • Page 6: Notes

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 1.3 Notes 1.3.1 Safety Instruction In order to avoid the possible risk and prevent damage to the device, please observe the following safety matters: Note:  Please don't carry out maintenance and debugging to electric system by non-specialists, this will reduce the safety performance of equipment, enlarge the fault, and even cause harm to the personnel and property losses.

  • Page 7: Work Environment

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 1.3.2 Work Environment Solid, level ground installation  Good ventilation, healthy environment, less dust  Temperature in work space: 5 to 40 ℃  Relative humidity in work space: 30% to 90% without condensation ...

  • Page 8: Chapter Ii Main Interface Specification

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter II Main Interface Specification 2.1 System Powered on After the system is powered on, the man-machine interface will display the boot interface, spindle will carry out rotational detection automatically, and then reset other parts. The specific reset actions are related to the settings of power on reset parameters.
  • Page 9 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System files. If the automatic identification function of template identifies the template number before processing, file with this number will be taken as the current processing file automatically. Lock file key: locks the current processing file to prevent wrong operation, other processing files can't be chosen after the lock, and icon will appear in preview area.

  • Page 10: Display Specification Of Processing Auxiliary Interface

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System forward, long press for continuous empty advance. Processing number of needle setting key: number on the upper line is the total number of needle of processing files, number on the lower line is the current processing number of needle.
  • Page 11 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Figure 2-2 Processing Auxiliary Interface Functions of keys on auxiliary interface are introduced as follows: Bobbin thread winding switch: every press to switch between "Allow" and "Forbid". Press the start running switch after "Allow", winding operation can be performed, and the spindle will start winding at the set speed of this page.

  • Page 12: Display Specification Of Manual Frame Moving Interface

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System : press the keys then the corresponding electromagnetic valve open once and close again. … : press the keys then the corresponding IO output function is always on, press again then the output is closed. Note: please do not hold the solenoid valve control keys such as Trim key for a long time without loosening, otherwise it may lead to damage of the electromagnetic valve connected on this output due to overheat!

  • Page 13: Display Specification Of Base Settings Interface

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System medium, high speed. Correspond to the pattern making speed 1, 2, 3 in "User Parameters". Eight direction keys such as : move in the X, Y axis direction. "Z+", "Z-", "Axis 1+"... "Axis 3-": manually turns the corresponding axis, some axis is invalid to parts of the machine.
  • Page 14 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System While position of the template actually made on the workbench may be as follow: So align base point 1 and A, base 2 and B, and adjust the position of processing pattern in the system to correspond to the position of template slotting.

  • Page 15: Display Specification Of Processing Statistics Interface

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 4) Click on , complete base point 2 settings, and return to main interface automatically. System will write this position into processing file, and the processing preview area pattern will adjust to the corresponding template position. After aligning to the base point, as long as it doesn't modify the file and the template, there is no need to align to base again.
  • Page 16 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System "Cur. File All": refers to the total completed number of current processing files all the time. Click on "Clear All" for zero clearing. "Cur. File Now": refers to the total completed number of current processing files on the same day.

  • Page 17: Main Menu Interface

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System “Work Time”: sum total of the processing time for all time. 2.3 Main Menu Interface In the processing main interface, press key to enter the main menu interface, as shown in the figure: File management: manages memory files and the U Disk files, carries out input/output file operations.

  • Page 18: Chapter Iii File Management

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter III File Management File management is used for operations such as input, output, and deletion for U Disk and memory files. System identifies processing files with .FLW and .HLW suffix only. Processing files are created by attached PC graphics editing software, or generated using the file collection function.

  • Page 19: U Disk File Management

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System multiple selected files and rename it. Delete the selected file: deletes the currently selected file or the last file of multiple selected files. Batches delete selected files: deletes the currently selected multiple files.
  • Page 20 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System U Disk file management uses 8.3 rules for naming display, displays .FLW format files and subfolder names in U Disk root directory by default, and .DIR suffix means that this is a folder.

  • Page 21: Chapter Iv File Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter IV File Collection File collection (template making) is used to create new processing files, or add sewing path to the existing processing files, etc. If you need to create complex and precise graphics, it is recommended to use the attached sewing control software, the effect will be better.
  • Page 22 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System collection point "AX", "AY": refer to coordinates of the current cursor point relative to the absolute origin (without empty sending section) or end point of previous empty sending section (with empty sending section) "STEP": refers to the stitch length of current collection section "STITCH": refers to the total number of stitches of collected files...
  • Page 23 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System section is multiple line segments. Press the key once; when the background becomes yellow, the current collection section is a curve (more than 3 points generate a curve). Curve generating key: when collection for multiple line segments and curve, press the key to complete the current section collection.

  • Page 24: Empty Sending Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 4.2 Empty Sending Collection In file collection main interface, press the key, the key background becomes yellow (it will be empty sending mode automatically for the first time entering into the collection interface), which shows that the current section collection is empty sending mode (empty sending: move the frame only, the spindle is not sewing), as shown in figure: In empty sending collection, two points generate a section of empty sending.

  • Page 25: Straight Line Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System In single needle collection, two points generate a stitch. Absolute origin or the end point of previous collection section is the first point of single needle collection. Press keys to move the cursor to the needed position, press the to generate single needle.

  • Page 26: Arc Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System In straight line collection, two points generate a section of straight line. Absolute origin or the end point of previous collection section is the first point of straight line collection, displayed by red cursor. Press keys to move the cursor to the needed position, press the key to generate a straight line.

  • Page 27: Round Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System If it needs to draw accurate arc, refer to coordinate point, to make the height reference point on the midperpendicular of connection line between start point and end point. If it needs to adjust the stitch, speed, fastening, complementary sewing, zig-zag sewing and insert functional code at the end of this section, please refer to relevant setting operations.

  • Page 28: Multi-Segment Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System diameter line constituted by the first and the second points, and distance from the diameter line is the radius of the round. If it needs to adjust the stitch, speed, fastening, complementary sewing, zig-zag sewing and insert functional code at the end of this section, please refer to relevant setting operations.

  • Page 29: Curve Collection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System This operation may be done at any time before the graphics generation. 4.8 Curve Collection In file collection main interface, press the key, the key background becomes yellow, shows that the current section of collection is curve mode, as shown in figure: In curve collection, it can collect 127 points continuously at most, to generate a curve by the radian way of adjacent 4 points.

  • Page 30: Zig-Zag Sewing (Bartack)

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 4.9 Zig-zag Sewing (Bartack) In file collection, if the current collection section needs zig-zag sewing, press the key to enter zig-zag setting interface, as shown in figure: There are 3 kinds of zig-zag ways: is zig-zag sewing along the left side of the collection direction;...

  • Page 31: Multiple Sewing And Complementary Sewing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System If you want to cancel the bartack, click to enter zig-zag setting page; click on the zig-zag sewing icon with yellow background to make it become white, click "OK" to return to collection.

  • Page 32: Reinforcing Sewing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System empty sending to the sewing start point of the second thread to carry out reverse sewing. Complementary Sewing: used for the zoom copy with specified number of times and spacing to collected circular arc, round, polygon, curve. The effect is shown in figure : Means to add multiple sewing to the left of the input stitching direction.

  • Page 33: Forward And Backward Reinforcing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System figure: Choose forward and backward reinforcing or closed reinforcing way according to the need. 4.11.1 Forward and Backward Reinforcing Forward and backward reinforcing is only applicable to the unclosed graph. Forward and backward reinforcing is the reverse stitching of the head and the tail.

  • Page 34: Closed Reinforcing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System There are four ways for end reinforcing: : means to carry out reverse stitching to the end for 1, 2, 3, 4 times respectively after normal sewing, as shown on the icon.

  • Page 35: Collection Speed And Stitch

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Set number of times and number of stitches to overlap according to the need, 0 means invalid. After the setting is completed, press the key to save the current settings. Press key once again to return to the collect file main interface.

  • Page 36: Insert Functional Code

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Set new sewing speed or stitch according to the need. After the setting is completed, press the key to save the current settings. Press key once again to return to the collection interface, to continue collection operation of current section. 4.13 Insert Functional Code In file collection, if you need to add functional code after the end point of last completed collection section, press the...

  • Page 37: Save File

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Trim functional code, trim thread when meeting the functional code, the spindle does not stop. Auxiliary Frame functional code, the frame rises when meeting the functional code, the spindle upper stops. Trim and Up Pause functional code, trim thread when meeting the functional code, the spindle upper stops.
  • Page 38 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press the alphanumeric key to input file name, press the key to save the file. The system will select the currently saved file automatically as processing file and jump to work interface for processing.

  • Page 39: Chapter V Modify File

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter V Modify File If a certain part or a point of the currently selected files need to be modified, it can be finished through "Edit File", or through "Collect File" for adding collection. It is effective for the graphic edit generated by "Collect File", and graphs converted by attached software may be not able to be edited due to too many sewing points.
  • Page 40 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System the original forward and backward 2 needles is greater than 12.7 MM, it will fail to remove. Forward and backward strengthening key: applicable to the unclosed graph. Forward and backward reinforcing is the reverse stitching of the head and the tail. Closed reinforcing key: suitable for closed graph.

  • Page 41: Add Needle Point

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System graphics changed. Presser foot tension setting key: used to set the intensity of yarn trapper and height of presser foot. 5.2 Add Needle Point In the edit file main interface, press the button to enter select stitch interface, as shown in figure: Coordinates...

  • Page 42: Delete Needle Point

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press the left-right direction keys to adjust distance from the needle point to add to the currently selected needle point, and the distance cannot be more than the distance from the currently selected needle point to the originally next needle point, otherwise it will be invalid.

  • Page 43: Forward And Backward Reinforcing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System operation interface, as shown in figure: Press the key to confirm deleting selected needle point. It will return to the select stitch interface automatically, and you can continue to edit or click button to save the changes and return to the edit file main interface.

  • Page 44: Closed Reinforcing

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System "Reverse stitching backwards from the beginning” is beginning reinforcing, "Reverse stitching forward from the end" is end reinforcing, which can be set at the same time, or either. Set number of times and number of stitches to reverse stitching according to the need. After the setting is completed, press the key to save the current settings.

  • Page 45: Delete Multi-Needle

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press the Single Step or Continue key to move the cursor forward and backward to the end point of the closed graph, press the key to enter the edit operation interface, as shown in figure: Closed reinforcing is effective for the end point of closed graphs (a.
  • Page 46 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press the Single Step or Continue key to move the cursor forward and backward to the needed position. Press the key to enter the edit operation interface, as shown in figure: Press numeric keys to input the number of threads needed to delete, press the button to delete specified number of threads after the cursor point.

  • Page 47: Append Needle Point

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 5.7 Append Needle Point In the edit file main interface, press the button to enter select stitch interface, as shown in figure: Press the Single Step or Continue key to move the cursor forward and backward to the needed position;...

  • Page 48: Append Multi-Needle

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Exit Press the direction keys to move to the position where it needs to append stitch, the X, Y positions above direction keys display the relative coordinates of cursor with the selected point;...

  • Page 49: Modify Functional Code

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System key to complete appending. It will return to the select stitch interface automatically, and you can continue to edit or click button to save the changes and return to the edit file main interface. The following is the before and after contrast figures of appending 4 needles at the 6th needle position.

  • Page 50: Modify Needle Position

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press keys to modify or insert functional code according to need, the text will become red when the functional code is selected; press the functional code key again or press the button to cancel the current setting, and the text becomes gray.

  • Page 51: Modify Current Point Needle Position

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System needed position. Press the key to enter the single needle offset operation interface by default. There are two ways for needle position modification: Modify the needle position of the current point, with no influence to other stitches after the modification. Modify all needle positions after the current point, the subsequent stitches will offset as a whole after the modification.

  • Page 52: Modify All Needle Positions After Current Point

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 5.9.2 Modify All Needle Positions after Current Point In the modify needle position interface, press the button to enter to modify all needle positions after current point interface, the icon background becomes yellow. As shown in figure: Press the direction keys to move the cursor to the position where it needs to modify the stitch point, and the moved distance should be not greater than 12.7 MM, press the...
  • Page 53 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press the Single Step or Continue key to move the cursor forward and backward to the starting point of section offset, and press the key, mark with red cursor; press the Single Step or Continue key to move the cursor forward and backward to the final position of section offset again, and press the key to enter the modify setting interface, as shown...

  • Page 54: Section Speed Modification

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System click button to save the changes and return to the edit file main interface. In section offset, selecting lines and empty offset way effect is as shown below: 5.11 Section Speed Modification In the edit file main interface, press the button to enter select stitch interface, as shown in figure:...

  • Page 55: Overall Offset

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press keys to choose the required speed ratio, and the background becomes yellow. Press key to complete modification. It will return to the select stitch interface automatically, and you can continue to edit or click button to save the changes and return to the edit file main interface.

  • Page 56: Secondary Origin Modification

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System It will return to the select stitch interface automatically, and you can continue to edit or click button to save the changes and return to the edit file main interface. In the graph offset interface, set offset for “X: 0.0 Y: 9.0”...

  • Page 57: Section Modification

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System File" - “Add Functional Code" part for secondary origin adding. It is used to return to the secondary origin and no need to return to absolute origin after processing a file. Secondary origin modification affects the empty offset section only, and will not affect other sewing areas.
  • Page 58 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Press keys to choose the stitch way needed to modify sections, and the background becomes yellow; choose the stitch to use; Press key to enter the corresponding interface. If you choose , it will be done directly;...

  • Page 59: Chapter Vi User Settings

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter VI User Settings Users Settings is mainly that in use, according to their processing requirements, users adjust parameters to meet the convenient processing requirements and improve processing efficiency. 6.1 User Settings Interface In the main menu interface, press button to enter the user setting interface;...
  • Page 60 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Auto Processing: Set up parameters needed by automatic processing. Needle Starting Speed: Set the speed of the first several needles before starting up. Speed Param: Set the running speed of spindle and XY axis. Frame Setting: Set related parameters of pressure plate.

  • Page 61: User Settings Parameters Introduction

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 6.2 User Settings Parameters Introduction Para mete Default Parameter Name Scope Parameter Meaning and Note Clas Value sific ation Uplifting after Work End Yes/NO Main Constant Speed Mode Axis/Feedin Feeding (Fixed) Trimming after Work End Yes/NO...
  • Page 62 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System sewing time Preview stitch presser frame movement Inching Speed (mm/min) 100-20000 5000 speed when collecting or modifying the file When moving frame manually or Patterning Speed 1 100-20000 collecting file, the speed corresponding to icon of the eight direction keys.
  • Page 63 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System ation is 2800, it will be 2800 * 90% = 2520 Setti 对应于采集文件界面“MD1”图标速度。 Medium Speed 1-100 Speed corresponding to the "MD1" icon in Magnification (%) collect file interface. Low Speed Magnification Speed corresponding to the "L"...
  • Page 64 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Sewing Thickness Type Thick/1/2… Thick Light-Material Thickness Thick/1/2… Thick Middle-Material Thickness Thick/1/2… Thick Feed heavy-Material Thickness Thick/1/2… Thick Whether to enable Broken Threads Broken Threads Detection Yes/NO Detection function Cutting for the Broken Yes/NO Automatic cutting for the broken threads Brok...
  • Page 65 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Reset When Powered on Yes/NO er on Reserve Yes/NO Setti Reserve Yes/NO If Auto.Alarms Yes/NO Whether to enable circulation processing If Circular Processing Yes/NO to the same file Scr.Saver Time ON/OFF (Unused) Screen Type...

  • Page 66: Chapter Vii Auxiliary Operation

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter VII Auxiliary Operation Auxiliary operation is mainly composed by Combine File, Test for External Components of Equipment, User Management, System Update, etc. 7.1 Auxiliary Operation Interface In the main menu interface, press the button to enter auxiliary operation interface, as shown in figure: Combine File...

  • Page 67: Combine File

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 7.2 Combine File In file processing, if you need to combine few graphics into one graphics for processing, you can do it through the following operations. Combination can be undertaken to up to eight selected files.

  • Page 68: Export Parameters

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 7.3 Export Parameters It is used to export all set parameters of the system to the U disk as a backup, it can be imported to use from the "Ex-Factory Parameters" interface of main menu interface. It is suggested to export system parameters to the U disk for backup in use for the first time.

  • Page 69: Input Detection

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Test the corresponding output control according to the need. For output of trimming threads, pulling threads, loosing threads electromagnetic valve, click once, the device electromagnetic valve will switch once, and long press to turn it on always.

  • Page 70: Lock Machine Settings

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System You can trigger related sensor manually to check whether the input state is changed, in order to detect whether the circuit part is normal. 7.6 Lock Machine Settings Lock Machine In auxiliary operation interface, press the button and enter the super Setting...

  • Page 71: Date Settings

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Note: this function is only limited for manufacturers’ use, not for customers. Incorrect use of this feature may lead to lock of the machine. 7.7 Date Settings It is used to set system time displayed on the upper right corner of the screen, such as year, month, date, hour, and minute.
  • Page 72 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System "V.H008.035”: "V.H008" means the major version number, unchanged after updating; "035" is the branch version number, which can be changed by updating to higher or lower version. Updating steps to system in the figure are as follows: 1) Acquire corresponding update file from suppliers, the file named TZD_H008.TFL (the file name is different for different major version number), place it under root directory of U disk...

  • Page 73: Chapter Viii Ex-Factory Parameters

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Chapter VIII Ex-Factory Parameters Ex-Factory parameters are used to import backup system parameter file from U disk into memory space, and you can choose one of the parameters in the memory to be used as a system parameter actually.
  • Page 74 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System System will list files with .XHY suffix and folders under root directory, folders are displayed with .DIR suffix. It supports multistage folders operation. Select parameter file name needed to import the machine (limited to the backup exported by the machine before), click , and this file will be copied into the memory space.

  • Page 75: Appendix I: Description And Solution Of Information Tips

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Appendix I: Description and Solution of Information Tips 1、 “Frame is up” Reason: it is detected the presser box didn't put down before resetting, processing, collecting file, and modifying file Solution: click to put it down.
  • Page 76 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System equal to "Total Number" Solution: a. if you use processing statistics function, modify "Statistics Initial Value" or "Total Number", to make "Statistics Initial Value" less than "Total Number". b. If you don't use processing statistics function, you can click to close the processing statistics function directly.
  • Page 77 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System See Section 2.2.4. 10、 “Prompt: Errors on Offset!” Reason: when entering the Base Settings page, it is found that the base coordinate exceeds the scope of processing Solution: decrease the size of processing file, use the processing file generated by upper computer software directly, 11、...

  • Page 78: Appendix Ii: Introduction To Quick Start

    星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System Appendix II: Introduction to Quick Start (1) Start the machine After installing the equipment, plug in. Rotate or press the power switch, start the machine. After showing the logo, it will enter the processing main interface, as described in Section 2.2.1.
  • Page 79 星火全自动缝纫控制系统使用说明书 Operation Instruction for Xing Huo Automatic Sewing Control System 1. If it is not the processing for the first time (has been copied to the memory to align at base, and used the template automatic recognition function), there are just two steps: put in the template - >...

Table of Contents