Car stereo mp3/wma player with pll fm stereo radio rds usb/sd/mmc/ front aux input detachable front panel (8 pages)
Summary of Contents for Sencor SCD 6504MR
Page 1
SCD 6504MR SCD 6514MR CAR PLAYER CD/MP3/USB/SD AUTORÁDIO S PŘEHRÁVAČEM CD/MP3/USB/SD AUTORÁDIO S PREHRÁVAČOM CD/MP3/USB/SD AUTÓRÁDIÓ CD/MP3/USB/SD LEJÁTSZÓVAL RADIO SAMOCHODOWE Z ODTWARZACZEM CD/MP3/USB/SD...
TABLE OF CONTENTS BEFORE USING THE CAR RADIO ............................3 Unpacking and checking the accessories ..........................3 DEVICE DESCRIPTION ................................4 Car radio....................................4 Display....................................5 Removing and attaching the front panel ..........................5 WIRING DIAGRAM ................................... 6 3.5mm AUX INPUT FRONT ..............................7 INSTALLATION IN DASHBOARD ..............................
Page 4
Thank you for purchasing this product. We wish you many pleasant hours of listening to your favorite music. Personal Safety has been taken in consideration in the design and manufacturing this product, however any improper use or operation may result in an electrical shock, fi re and/or any other hazards. To prevent these hazards it is strongly recommended to read this manual thoroughly and adhere to the following precautions.
BEFORE USING THE CAR RADIO Unpacking and checking the accessories Please check if the following items and accessories are included in the received package: Car Radio 1x Protective Carrying Case for detachable front panel. 1x Mounting Bracket 1x Assemble Bar 1x Screw Bt5x20 4x Bolt M5 1x Nut M5...
DISPLAY The icons are explained throughout this document. For example: WMA will light up when WMA audio is played back and MP3 will light up when MP3 audio is played back. The Stereo icon will light up when a radio station is emitting in Stereo. Not all icons are in use or will be displayed. Removing and Attaching the front panel Removing Open the front to min 45 degrees or to its fold down position.
WIRING DIAGRAM The Car Radio comes complete with built-in ISO connector and installation brackets and is easily fi tted into your car. Hereunder you will fi nd the diagram of the ISO connection, which is used in the majority of the cars. If your vehicle is not fi tted with an ISO connection, you can optionally purchase a female-ISO contra connector with separate wires and connect the wires according the description of the ISO connector.
Note: Only use groundless loudspeakers. Use only loudspeakers of minimal 30Watt, using fewer watts may result in damaging your loudspeakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only, using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus (-) to the car body (GND). The Car Radio is using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.
INSTALLATION IN DASHBOARD If your car is fi tted with a one (1x) DIN size opening for a car audio system, you can install the car radio according these steps. Note: Unit should be installed horizontally in an angle less than 30°. 0030352.602 1X DIN SLOT Before installing the unit,...
BASIC OPERATIONS Power / MUTE button Press the power button to switch the unit ON. Long press again to switch it OFF. Press the button briefl y to Mute. Please note that the volume will be muted on all audio output connectors. The MUTE icon will be seen on the information display. To resume playing, press the button briefl...
Programming Preset Stations Search a station by Manual or Automatic Tuning. When the desired station and frequency is found, press the OK button, now rotate the Volume knob to choose 1-6, press the OK button to confi rm and store the station. This sequence can be repeated for every available BAND.
Note: Function not available for Commercial Audio CD’s. After 5 seconds of non operation the display will return to the default of the selected mode. If the clock display is enabled the unit will show the clock for several seconds and then returns to the normal display info.
Play/Pause In CD/MP3/SD/USB mode press the OK button to pause a song press it again to resume playing. Repeat MP3/USB/SD/CD mode press the BAND button repeatedly to choose RPT play, then press OK. The RPT icon is shown on the information display.
Page 16
TA and TP (Travel Announcements / Travel Program Identifi cation) When a local radio station broadcasts a traffi c report, the unit is informed. This information can be used to provide you with travel information without having to listen to that particular radio station all of the time. When the travel announcement is broadcast the unit will interrupt the AUX or CD that is playing and will automatically switch to the announcement.
TECHNICAL SPECIFICATIONS Enjoy listening to your music An outstanding stylish designed Automotive 1x DIN CD player, with FM RDS EON Radio. This easy to install system comes complete with a fold-down faceplate which is detachable for theft prevention. The built-in 4x40 Watt Power Amplifi er is offering brilliant HiFi sound characteristics.
Page 18
ADDITIONAL IMPORTANT NOTES • Do not use the unit for a long time without running the vehicle’s engine, it will drain the battery preventing a correct start of the engine and it will reduce the lifecycle of the battery. • If possible ask qualifi...
Page 19
DISPOSING OF THE BATTERY / BATTERIES Please check local regulations for disposal of batteries or call your local city offi ce or your household waste disposal service or the shop where you purchased the product. The battery / batteries should never be placed in municipal waste. Use a battery disposal facility in your neighborhood or community, if available.