Download Print this page

A&L Furniture Lighthouse with Base Assembly Instructions

Download this manual

Assembly Instructions

Lighthouse with Base

Furniture Co.

Thank you for choosing

We hope that this piece brings you many years of enjoyment!

For help with assembling your furniture,

or if you have missing hardware, please email us at

help@aandlfurniture.com or call us at 866-896-5747

Page 1 Assembly Instructions Lighthouse with Base Furniture Co. Thank you for choosing We hope that this piece brings you many years of enjoyment! For help with assembling your furniture, or if you have missing hardware, please email us at help@aandlfurniture.com or call us at 866-896-5747...
Page 2 PARTS HARDWARE (included) (included) Head Body 1½” Bolts (2) 1½” Screws (6) Ground Stakes (2) Square Drive Bit (1) TOOLS NEEDED Base Screw gun Phillips Head Screwdriver Hammer STEP 1 Remove the four screws at the ends of the shipping strips to unfasten from the lighthouse body. (See photo 1.) Pull the head out of the lighthouse.
Page 3 STEP 3 Set the lighthouse body upright & place the head on top, aligning the predrilled holes inside the head with the threaded inserts in the top of the body. (See photo 6.) Insert the 1½” bolts in the predrilled holes inside the head.