Advertisement
5Ghz Outdoor Omni 12dBi with 1M N-Plug to N-Plug NFC200 Low Loss RF Cable Pole / Wall Mount Antenna
Installation:
1. Mount the antenna on the brackets according to the Mounting diagram. Make sure
the horizontal omnidirectional of the ANT-12A antenna with a beamwidth (H plane)
of 360 ̊ and a beamwidth (E plane) of 12 ̊ .
2. Mount the ANT-12A antenna on the antenna on the mast supplied by customer
according to the Mounting diagram.
3. Test the antenna with equipment to make sure the antenna receive the best signal first,
then lock all the screws and seal the connector between ANT-12A antenna and NFC-NNP-
1M RF cables with a waterproof cap.
No Surge arrester installation
Installation using a Surge arrester
3
Installation Guide
Advertisement
