Denver BFH-150 - Fitness Band Manual

Also See for BFH-150:

User manual (86 pages)

Table of Contents

Contents

1 Features
2 Download Denver Smart Life app
3 Pair the device
4 Device Activate & Charge
5 How to use
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Denver BFH-150 - Fitness Band Manual

Features

0.42" OLED Display
Built-in HR sensor, monitor your heart rate
Monitor your daily activity and sleep
Built-in sedentary reminder
Reminder of SMS, emails, calendar events and social media activity
Smart wake-up, raise or shake your arm to wake up the device
Built-in 55mAh Li-poly battery, up to 7 days standby time
Compatible with iOS8 or above and Android 5.0 or above

Download Denver Smart Life app

The fitness band needs to pair with the smart phone through app.
Search for Denver Smart Life APP on Apple App Store or Google Play store for android version, or scan below QR code to install Denver Smart Life APP.

Android

iOS

This device is enabled with Bluetooth 4.2, and support phone with Android5.0/ iOS8 or above

Pair the device

Please make sure the Bluetooth is ON in your smart phone settings and then open app "Denver Smart Life". Tap "Connect the device" on Settings --> Select the image of "BFH-150" for connection.

When searching and pairing device, please press on the touch area of device and activate the device (screen on). App will search the device automatically, select the device name in the smart phone searching list and connect the device to the app.

After binding successfully, all information on device will sync on APP, including time, steps, heart rate and notifications reminder.

Device Activate & Charge

Make sure the device is charged before initial use. In case device is low on battery, connect the device to the charger clip and connect USB cable to your PC. The device will automatically boot up (please clamp the charging clip to the back 2 points position of bracelet as below)
Device Activate & Charge

How to use

Touch Area
Short press: function switch
Long press: Turn on/off, reset

Once the device connected to the app successfully, it will sync your activities and sleep data automatically, please press the touch area on the device to switch into different display modes as following:

Time Mode
Steps
Distance
Calories
Sleep Monitor	The fitness band can record your sleep from 22:00 to 9:00. Sleep data can be found in "Denver Smart Life".
Heart rate Monitor
Bluetooth on

Note: Long press touch area:

Turn on
Reset
Turn off

Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material
(discarded electric and electronic equipment and batteries) is not handled correctly.

Hereby, Inter Sales A/S declares that the radio equipment type BFH-150 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

Please enter: www.denver-electronics.com and then click the search ICON on top line of website. Write model number: BFH150

Now enter product page, and red directive is found under downloads/other downloads.

Operating Frequency Range: 2.402 GHz—2.480 GHz
Max Output Power: 4.0 dBm
Warning Lithium battery inside

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics