Advertisement
INTRODUCTION
Hereafter are reported the safety instructions for use of
DATEXEL Associated Apparatus , in compliance with the
European standard 2014/34/EU (ATEX).
Read carefully these instructions before to install or test
the following devices:
DAT 5030 IS /A
DAT 5030 IS /AH
DAT 5030 IS /B
DAT 5030 IS /BH
DESCRIPTION
The Associated Apparatus DAT 5030 IS /A, DAT 5030 IS /AH, DAT 5030 IS /B and DAT 5030 IS /BH are designed and manufactured
by DATEXEL Srl, Tradate (VA) in compliance with the Essential Health and Safety Requirements defined by the Directive 2014/34/EU
(ATEX), Group II, Category (1) G D.
In compliance with the Standards EN 60079-0 : 2012 / A11 : 2013, EN 60079-11 : 2012, EN 60079-26 : 2015
MARKING
CERTIFICATE NUMBER:
PROTECTION MODE:
ATEX CODE:
Page 1 of 3
CESI 04 ATEX 095
[Ex ia Ga] IIC / [Ex ia Da] IIIC
Associated Apparatus,
category "ia", group "IIC", for installation in safe area.
0722
nr. Notified Body charged of surveillance on production (CESI)
0722
II
Group II (surface installations)
(1)
Category 1 apparatus (associated apparatus)
G
Explosive atmosphere of gases, vapours and mists
Explosive atmosphere of dusts
D
INSTRUCTIONS DAT 5030 IS ATEX
INSTALLATION, MAINTENANCE and USE
II (1) G
II (1) D
ATEX
.
Advertisement
Table of Contents
Related Manuals for Datexel DAT 5030 IS/A
Summary of Contents for Datexel DAT 5030 IS/A
- Page 1 The Associated Apparatus DAT 5030 IS /A, DAT 5030 IS /AH, DAT 5030 IS /B and DAT 5030 IS /BH are designed and manufactured by DATEXEL Srl, Tradate (VA) in compliance with the Essential Health and Safety Requirements defined by the Directive 2014/34/EU (ATEX), Group II, Category (1) G D.
- Page 2 SAFETY INSTRUCTIONS FOR INSTALLATION, USE and MAINTENANCE The installation and maintenance of DATEXEL Associated Apparatus must be made in compliance with the Standards relative to electric installations in hazardous areas. Before install the device, read carefully the relative instructions sheet and respect the following standards: Hazardous areas with GAS atmosphere and Combustible Dust (not mines) - Standard EN 60079-14 (current edition) for choice and installation of the equipments.
- Page 3 Page 3 of 3 Via monte Nero, 40/B – 21049 Tradate (VA) Italy - Phone: +39 (0)331841070 Fax:+39 (0)331841950 - e-mail:datexel@datexel.it www.datexel.it Datexel s.r.l. reserves its right to modify all or in part the characteristics of its products without warning at any time.
Need help?
Do you have a question about the DAT 5030 IS/A and is the answer not in the manual?
Questions and answers