LX Cygni Tracker Quick Start Manual

For help visit incyt by LX
incyt.io/support
Copyright 2021 LX Corporation Pty Ltd. All rights reserved.
Apple and the Apple Logo are trademarks of Apple Inc., registered
in the U.S. and other countries. App Store is a service mark of Apple
Inc., registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.

Product Overview

1
2
3
4
Model: ETSL1K
S/N: A5XXX
5
6
1 Solar Panel 4 Commissioning QR Code
2 LoRa Antenna 5 Unique Serial Number
3 LED / Magnetic Switch Attachment point
6

Safety and compliance

Ensure installation complies with all relevant local
regulations and requirements.
Do not disassemble, cut, drill, or modify the device in
any way.

Troubleshooting

LED does not flash white
Slowly swipe the magnet along the front edge of the
device until the LED blinks green.
LED flashes various colours or in a pattern
The device has already been activated.
GPS co-ordinates do not update on dashboard
Slowly swipe the magnet along the front edge of the
device until the LED blinks green. Wait for up to
5 minutes and update the dashboard.
Device reset
Hold the magnet over the LED until the LED starts
blinking a pink colour.
Further installation, activation and troubleshooting
information is available at incyt.io/support
Cygni Tracker
Quick Start Guide