Advertisement
Quick Links
Advertisement
Related Manuals for PROLiNK Sorra Series
Summary of Contents for PROLiNK Sorra Series
- Page 1 User Guide Sorra Series Battery Pack Version 1.00 (English)
- Page 2 Daftar Isi 1. INTRODUCTION ............................1 2. UNPACKING AND INSPECTION ......................1 3. BATTERY INSTALLATION ........................2...
-
Page 3: Unpacking And Inspection
1. INTRODUCTION There are three types of battery pack. Please refer to the following configuration for each UPS model. Applicable Minimum required Battery Total battery Applicable UPS Type battery voltage numbers (pcs) model capacity per UPS module (pcs) 3-3 10K 2 (serial connection BP 96-120V ±96V ~ ±120V... -
Page 4: Battery Installation
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged during transportation. Do not use the unit and notify the carrier and dealer immediately if there is any damage or lacking of some parts. Please keep the original package in a safe place for future use. Make sure to take the battery pack out of the package in the right way. - Page 5 Installation for BP 96V (7Ah/9Ah/10Ah) Put all batteries inside of battery pack and connect jumper wires from fuse PCB to batteries as below chart. Installation for BP 120V (7Ah/9Ah/10Ah Put all batteries inside of battery pack and connect jumper wires from fuse PCB to batteries as below chart.
- Page 6 Installation for BP 192V (5Ah) Put all batteries inside of battery pack and connect jumper wires from fuse PCB to batteries as below chart.
- Page 9 Register online for your Product Warranty at www.prolink2u.com Prolink is a registered trademark of Fida International (S) Pte Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Product images are purely for illustrative purposes and may defer from the actual product.
Need help?
Do you have a question about the Sorra Series and is the answer not in the manual?
Questions and answers