Page 1
Range: see Sticker * Installation. On the topside of the ALFANET 30 you can see how the sensor, power supply and relay has to be connected. After connecting the ALFANET 30 to the power supply, a self test function is started. As this test is finished the measured temperature appears in the display.
Page 2
UP and DOWN keys together with the SET key allows you to change the value of this parameter. If after 20 seconds no key is pushed, the ALFANET 30 changes to its normal operation mode. * Adjustment sensor. The sensor can be adjusted by using the Sensor Offset (parameter 04). Indicates the ALFANET 30 e.g.
Page 3
Front : Polycarbonate IP65 Sensor : SM 811/2m (1000Ω at 25°C) Sizes : 35 x 77 x 71,5mm (hwd) Panel hole : 28 x 70mm (hw) * Parameters ALFANET 30. PARA- DESCRIPTION PARAMETER RANGE STANDARD METER VALUE Offset temperature sensor -15..+15°C...
Need help?
Do you have a question about the ALFANET 30 and is the answer not in the manual?
Questions and answers