Midland ALAN-42 DS Adjustment Procedure

Adjustment Procedures for the ALAN-42 DS
1.Band setting for the production mode.
1).Turn off the radio.
2).Make Link for production mode as below.
Link S1 S2
13 1 1
3).Press the SCAN + AM/FM key and hold.
4).Turn on the radio.
5).The radio go to production mode. At this time the LCD display" Pd" display on the LCD, and go to Channel 1.
6). Turn off the radio.
7). Make Link as below to shipment for the default band.
Link S1 S2
1 0 0
8). Turn on the radio to adjustment.
Even if link to default band, keep the production mode until factory reset.
1-1. Table of Link.
Link S1 S2
1 0 0
2 0 0
3 0 0
4 0 0
5 0 1
6 0 1
7 0 1
8 0 1
9 1 0
10 1 1
11 1 1
12 1 1
13 1 1
"0" = closed, "1" = open
S3 S4 Results
1 1 Production Mode
S3 S4 Results
0 0 I, I2, d4, EU, EC, E, F, PL, UK
S3 S4 Results
0 0 I, I2, d4, EU, EC, E, F, PL, UK
0 1 I, I2, d4, EU, EC, E, F, PL, UK, PX
1 0 I, I2, d4, EU, EC, E, F, PL, UK, RU
1 1 I, I2, d4, EU, EC, E, F, PL, UK, PX, RU
0 0 Only KSA
0 1 Only EC
1 0 AU, AM
1 1 I, I2, d4, EU, EC, E, F, PL, UK, PX, RU, SW, AU, NZ
0 0 Only RU
0 0 RU, PC
0 1 Only E
1 0 Only NZ
1 1 Production Mode
For factory
Default band
Default band
For factory