Advertisement
Momentary Flashlight Mode
Lightly press the upper raised portion of the tail switch (without clicking the
flashlight on) for momentary operation. Release the switch to turn the light off.
Constant-on
Fully press the upper raised portion of the tail switch until it clicks and
then release for constant-on in high-brightness mode. Press and release the
switch to turn the light off.
Select Brightness Level
Press and hold down the upper raised portion of the tail switch. The light
will cycle from high to medium to low and then back up again at a rate of
approximately one mode per second. The light will continue to cycle up and
down through the various modes as long as the switch is held down. When
the desired brightness level is reached, simply release the switch, and the
light will remain in that brightness mode. Press and release the switch to turn
the light off.
Floodlight
Press the bottom recessed portion of the tail switch until it clicks and then
release for floodlight mode. Press and release the switch again to turn the
light off.
Dual-Light
Dual-Light allows the user to turn on both the Flashlight (at any brightness
level) and the Floodlight, at the same time. First select the appropriate
brightness level of the flashlight using the directions above. Next press and
release the bottom switch to activate the floodlight. Both the Flashlight and
the Floodlight are now running. Press and release both the upper and lower
switches to turn the light off.
Strobe Function
From off or any mode, rapidly double click the upper raised portion of the
tail switch to activate the strobe function running at full brightness. Press and
release either switch to turn the light off.
Learn more about work lights on our website.
Advertisement
