Table of Contents
Advertisement
▪
4 GB of Resident eMMC Flash
▪
16 MB of Serial NOR Flash
▪
Battery-backed Real-Time Clock
▪
SD/MMC Flash Card Interface
▪
2 SPI ports
▪
2 I2C Ports
▪
1 I2S Audio Port
▪
2 CAN Bus Interfaces
▪
Timer/Counters and Pulse Width Modulation (PWM) ports
▪
4-Channel 12-bit Analog-to-Digital converter
▪
Typical power requirement less than 1 Watt
▪
JTAG for debug, including real-time trace
▪
FREE QT Creator IDE with GCC and GDB development tools
2 Hardware
2.1 Specifications
▪
CPU: Embedded Atmel ATSAMA5D35 processor running at 536 MHz.
▪
Flash: 4GB eMMC Flash and 16MB of Serial NOR Flash.
▪
RAM: 512MB 133MHz LPDDR2.
▪
Flash Disk: 4-bit Parallel or SPI serial SDHC/MMC interface.
▪
System Reset: Supervisor with external Reset Button provision.
▪
RTC: Real-Time Clock/Calendar with battery-backed provision using 32-bit free running counter.
▪
Timer/Counters: 2, 3-channel, 32-bit timers/counters with capture, compare, and PWM.
▪
Watchdog Timer: External Watchdog Timer (MAX6747).
▪
Digital I/O: 32 General Purpose I/Os with 16 mA drive when used as an output
▪
Analog I/O: 4-channel, 12-bit Analog-to-Digital converter (ADC)
▪
Power: Power Management Controller allows selectively shutting down on-processor I/O
functionality and running from a slow clock.
▪
JTAG: JTAG for debug, including real-time trace
4
Advertisement
Table of Contents
