1) Installation: To not damage your shower: dirt, sand,
soil, grass, etc., must not get inside the shower when
connecting to the water supply. Run the water and clean
the water pipes thoroughly before connecting.
2) Maintenance: To clean your shower, just wipe the
various elements with a soft cloth and stainless-steel
cleaner. Do not use abrasives or acid detergents.
Water contains calcium, which settles on the surface and
can cause stains. For routine cleaning, use a damp cloth
with a gentle soap, rinse and dry the shower.
Never use aggressive soap nor disinfectants (alcohol,
hydrochloric acid, or phosphoric acid) or abrasive cleaning
products so as not to scratch the surface.
If you do not use your shower for some time, do not
hesitate to cover it with a suitable cover. You can buy a
cover from our approved partners (list on our website)
USE AND MAINTENANCE MANUAL
3) Cleaning the showerhead nozzles: All our shower heads
are equipped with self-cleaning, UV-resistant silicone
nozzles. Most of the limescale deposits will practically
dissolve on their own. From time to time, wipe down the
lime scales deposits that could remain on the nozzles.
4) Recommendation before winter:
Option 1: Before the first frost, dismantle the shower and
store it in a frost-proof place.
Option 2: Leave the shower outside. You must completely
drain and dry your shower before the first frost. Remove
the cartridge, unscrew the hand shower and the shower
head. Leave the faucets open to prevent any remaining
moisture in the pipes.
Do not hesitate to contact us for advice and more
information.
Need help?
Do you have a question about the Aqua Nera and is the answer not in the manual?
Questions and answers