Tobii Dynavox Cradle Installation Instructions

Cradle for the I-13/I-16 Powerbank
Installation Instructions
The Powerbank Cradle should be fixed to Ø22.25 mm (7/8") mount tubes. It is designed for compatibility with the mounting
solutions from Rehadapt.
The power IN and OUT connectors to the Powerbank will pass
1
through the holes in the Powerbank Cradle. Ensure easy access to
this side of the cradle when mounting the Powerbank Cradle.
Insert the mounting tube into the fixing on the backside of the cradle.
Adjust the angle of the cradle to the required position.
Tighten both screws on the fixing to secure the cradle in position.
Copyright ©Tobii AB (publ). Not all products and services offered in each local market. Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Support for Your Tobii Dynavox Device
Get Help Online
See the product-specific Support page for your Tobii Dynavox device. It contains up-to-date information about issues and tips & tricks related to the product. Find our Support pages on-
line at: www.TobiiDynavox.com/support-training
Contact Your Solution Consultant or Reseller
For questions or problems with your product, contact your Tobii Dynavox solution consultant or authorized reseller for assistance. They are most familiar with your personal setup and
can best help you with tips and product training. For contact details, visit www.TobiiDynavox.com/contact