Advertisement
Advertisement
Table of Contents
Summary of Contents for Everything Hand Dryers Vega 4
- Page 1 Vega User Manual...
- Page 2 ⚠ IMPORTANT SAFETY INSTRUCTIONS WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS OBSERVE THE FOLLOWING: • Use this unit only in the manner intended by the manufacturer. The manufacturer is not responsible for any damages caused by misuse or defective installation. •...
- Page 3 INSTALLATION 1. Wall bracket removal 1.1 Place the main unit on a cloth to avoid marking its surface. 1.2 Remove 3 side & bottom security screws , using the service tool (fig.2) . 1.3 Lift the front cover off the main body. (fig.3). 2.
- Page 4 Power Cable Entry Power Cable Exit Back View 4.If applicable insert the Filter enablement pack & replacing the filter media 4.1. First installation time, insert the enablement pack, complete with filter media, into the filter bracket, and push until it clicks into the right position in the main unit. 4.2.
- Page 5 HEATER SWITCH & LOW SPEED MODE SWITCH & FILTER REPLACING WARNING: ENSURE POWER NOT CONNECTED 1. Remove the one security screw seated on the bottom surface from the unit, using the service tool (fig. 2). 2. Lift the front cover off the main body. (fig.3). 3.
Need help?
Do you have a question about the Vega 4 and is the answer not in the manual?
Questions and answers