Advertisement
Quick Links
A.R. North America
Attn: Pressure Washer Warranty Department
140 - 81st Avenue NE
Fridley, MN 55432
AR767
O
PERATING
Place
Stamp
Here
H.P. Power - Jet Cleaner
M
AINTENANCE
Warning:
This manual must be read before
installation or use of the unit.
Important
Winter storage or long time
Notice:
storage. Drain all water out of the
pump. Flush the pressure washer
with a 50% antifreeze solution,
and relieve the pressure. Flush the
pressure washer before you use it
again to remove the antifreeze.
M
ANUAL
Advertisement
Summary of Contents for A.R.North America AR767
- Page 1 AR767 H.P. Power - Jet Cleaner PERATING AINTENANCE ANUAL Place Stamp Here Warning: This manual must be read before installation or use of the unit. Important Winter storage or long time Notice: storage. Drain all water out of the pump. Flush the pressure washer with a 50% antifreeze solution, A.R.
-
Page 2: Warranty & Returns
RESSURE ASHER IMITED ARRANTY This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year on machine, 90 days on gun and hose assembly, from the date of retail purchase and is not transferable. Warranty covers replacement parts. - Page 3 NTRODUCTION Notes The high pressure power-jet cleaner you have purchased is a technologically advanced product designed by one of the leading European manufactures of high-pressure pumps. To obtain the best performance from your unit, read this booklet carefully and follow the instructions each time you use the cleaner.
- Page 4 2.1.11 DO NOT tamper with or alter the calibration of the safety Notes valve. EXPLOSION HAZARD. 2.1.12 DO NOT alter the original diameter of the spray head nozzle. OVER PRESSURIZATION MAY OCCURE. 2.1.13 DO NOT leave the cleaner unattended. ACCIDENT HAZARD. 2.1.14 DO NOT move the cleaner by pulling on the electrical cable.
- Page 5 Always use two hands when operating a pressure washer. This will assure The pump does not operate at the prescribed pressure. complete control of the equipment. Sudden changes in pump pressure. The motor buzzes but fails to start. Motor does not start. ROBLEMS Always test the GFCI plug prior to using the cleaner.
- Page 6 3.1.10 Use the cleaner only with accessories and replacement AR767 - Motor parts authorized by the manufacturer. The use of original accessories and replacement parts will ensure safe, trouble- free operation. 3.1.11 The cleaner must be used standing on a secure, stable surface, positioned as shown.
- Page 7 AR767 - Unloader Connect the high-pressure hose to the water (OUTLET) on re hose to the water (OU the cleaner. Connect the water supply hose. (not supplied) to the water (INLET) of the cleaner. The supply hose must have an internal diameter of at least 13 mm (1/2 in.) and must...
- Page 8 Keeing the trigger pressed, push the switch AR767 - Pump to start the motor. Turn the pressure control knob to the desired setting. (For models with this feature). 5.3.1 When re-starting the motor, always keep the spray gun trigger compressed.
- Page 9 AR767 - Body 5.6.3 Unscrew the adjustable head and fi t the rotary nozzle onto the lance. 5.6.4 Turn the high pressure cleaner back on. Recommended Cleaning Procedure 5.7.1 Dissolve dirt by applying detergent with the fan jet to the dry surface.
Need help?
Do you have a question about the AR767 and is the answer not in the manual?
Questions and answers