Advertisement
Quick Links
This document describes the front panel, LED indications, interfaces, rear panel, supported media types
and installation procedure for the INT10G12XXB5-X. LFP and Fail Mode (open) are supported on the
network ports via the optical splitter.
Front Panel
LED Indications
PS2
PS1
SYS
Port 1 L/A1
Port 2 L/A2
BP
Up Arrows SFP Ports 3-11
Down Arrows SFP Ports 2-12
Interfaces
Tap 1
Port 1
Network Port
Port 2
Network Port
Ports 3-11
Monitor Port
Ports 4-12
Monitor Port
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
RegenTAP: Dual Breakout | INT10G12XXB5-X | 4.22.1
Power Supply 2 LED
Power Supply 1 LED
System LED
Link/Activity LED
Link/Activity LED
N/A
Link/Activity LEDs
Link/Activity LEDs
Ingress Port 1
Ingress Port 2
User Guide
1
Advertisement
Summary of Contents for Garland RegenTAP Dual Breakout INT10G12 B5 Series
- Page 1 Interfaces Tap 1 Port 1 Network Port Port 2 Network Port Ports 3-11 Monitor Port Ingress Port 1 Ports 4-12 Monitor Port Ingress Port 2 Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
- Page 2 SFP must be inserted into Port 3 before power is applied to the unit. Tap 1 Port 1 Network Port Port 2 Network Port Port 3 Speed Control and Monitor Port Port 4-12 Monitor Ports Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
- Page 3 8. Connect the monitor ports to the desired source. 9. Verify the link LEDs are illuminated indicating link. 10. Verify the activity LEDs are flashing indicating traffic. Garland Technology | 716.242.8500 | garlandtechnology.com/support Copyright © 2022 Garland Technology, LLC. All rights reserved.
Need help?
Do you have a question about the RegenTAP Dual Breakout INT10G12 B5 Series and is the answer not in the manual?
Questions and answers