Power Select The Power Select is a control unit that enables individuals to communicate and control electrical and battery-operated (with an AC adapter source) toys, appliances, and devices. The unit was designed specifically for APH’s assistive...
Page 3
Direct mode; Timed Seconds mode; Timed Minutes mode; and Latch mode. Prior to using the Power Select and choosing a Mode of Control for a first-time switch user, consult with a professional person who is qualified to assess the abilities and limitations of the learner.
Page 4
Seconds (S) position, and the timer knob (upper knob) to the number of seconds you wish the appliance to remain on. When the time has expired, the Power Select will automatically turn off the appliance even if the user is still pressing the switch.
Page 5
To select, turn the lower knob to the Latch position. The timer knob is not used in this mode. The appliance will turn on when the switch is activated, and turn off when it is activated again. Power Select #1-08612-00...
Page 6
Setting Up 1. Plug the appliance(s) or device(s) into either Outlet 1 or Outlet 2 on the Power Select. 2. Plug the switch into Switch Jack 1 or Switch Jack 2 (corresponding to Outlet 1 or Outlet 2). The switch must have a 1/8 inch (3.5 mm) mono plug or adapter.
Page 7
(Timed Seconds or Timed Minutes modes). 1. Plug one choice (an appliance) into Outlet 1 on the left side of the Power Select and plug the other choice (different appliance) into Outlet 2 on the right side of the Power Select.
1. Check all cord and jack connections to make sure that they are in place firmly. • Is the Power Select plugged into the wall outlet? • Is the appliance cord plugged into the Power Select? • Is the switch plugged into the Power Select? Power Select #1-08612-00...
Page 9
Select control unit. 3. Check the switch by plugging it into another system. 4. Check the Power Select by plugging it into an outlet and connecting a single switch and appliance (that you know are working) to the Power Select.
2. Use caution when placing any appliance near a user (especially appliances that have moving parts or that generate heat). 3. Keep the Power Select and all appliances away from water and moisture. 4. Do not open the Power Select to expose its interior.
2. Never lift the Power Select by the electrical cord. When storing or packing for transport, use the original shipping box or wrap the control unit in protective padding. 3. Always unplug all switches when not in use; however, the Power Select may be left connected to a frequently used appliance for the user’s convenience.
Need help?
Do you have a question about the Power Select and is the answer not in the manual?
Questions and answers