Advertisement
3. STARTING/STOPPING THE ENGINE
1. STARTING THE ENGINE
· Turn the fuel valve to ON position, unscrew the drain plug on
carburetor bottom, and fasten the drain plug until oil spills out.
·Pull the choke rod to the CLOSE position. Adjust throttle to proper
position. Pull the starter grip lightly until resistance is felt, then pull it
rapidly.
(1) fuel valve
NOTICE:
·Do not allow the starter grip to snap back against the engine. Return
it gently to prevent damage to the starter.
· After engine started, let engine rotate 1---3 minutes at idle speed,
check whether it is balanced, cracked, then pull the throttle to open
position, adjust choke rod to OPEN .
(1)
auto-throttle
(2)
off position
(2) start level
3-1
3-2
12
(3) drain plug
Advertisement
