Peaq PMO S271-IQC User Manual page 12

Size = A5
ENGLISH
Before first time use
Remove the product and accessories carefully
from the original packaging. It is recommended
to keep the original packaging for storage. If you
wish to dispose of the original packaging, please
observe applicable legal provisions. Should you
have any questions regarding proper disposal,
contact your local waste management center.
Inspect the delivery contents for completeness
and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet
immediately.
Controls and components
A. Stand
B. On/off multifunction switch
C. Screen
D. DC jack
E. USB-jack with charging function (5 V
F. Headphone jack
G. DP input
H. HDMI input
Accessories
1 x Monitor
1 x HDMI cable
1 x Power adaptor
1 x Stand
3 x Screws
1 x User manual
1 x Quick manual
1 x Warranty card
Installing the stand
Mount the base and stand neck with the supplied
matching screws. Now mount the stand neck to
the appropriate place on the back of the monitor
with the screws provided. Put the cover cap on the
screw connection.
12
IM_PMO-S271-IQC_210804_V03_HR.indb 12 IM_PMO-S271-IQC_210804_V03_HR.indb 12
Connections
POWER SUPPLY
Insert the DC plug of the power adapter into the
DC jack on the back of the monitor.
HDMI, or DP connection
Connect the appropriate connectors on the back
of the monitor to your computer or other suitable
players using appropriate cables.
Note: If you would like to connect an external device
with this product, a good quality shielded cable
must be used, which ensures the electromagnetic
compatibility of the product and the used cable as
a whole.
HEADPHONE CONNECTION
Connect the headphones to the Headphone jack
of the device.
Note: For sound
/1 A)
headphones or loudspeakers, possibly with their
own power supply, are required.
Attention
Danger! Excessive sound pressure levels from
ear buds and headphones can cause hearing
damage. Listening to loud music for extended
periods of time may lead to hearing impairment.
Keep the volume at reasonable levels.
Operation
TURNING THE UNIT ON/OFF
Press the button to switch on the unit.
Light Monitor Status
Blue Power on
Red Standby mode/no signal
No light Power off
Note:
• In Off mode (menu setting Reset and Time Off),
the monitor will switch on automatically,when the
connected PC/notebook is started.
reproduction additional
5/8/2021 09:56 5/8/2021 09:56