VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.rosenlew.fi/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
This appliance is intended to be used in household and similar • applications such as: staff kitchen areas in shops, offices and other working – environments; by clients in hotels, motels, bed & breakfast and other – residential type environments; areas for communal use in blocks of flats or in launderettes.
• Do not install or use the appliance where the • Ensure that there are no visible water leaks temperature can be less than 0°C or where it is during and after the first use of the appliance. exposed to the weather. •...
• Concerning the lamp(s) inside this product and • Disconnect the appliance from the mains spare part lamps sold separately: These lamps electrical and water supplies. are intended to withstand extreme physical • Cut off the mains electrical cable close to the conditions in household appliances, such as appliance and dispose of it.
The info label reports the model name (A), product number (B ) and serial number (C). TECHNICAL DATA Dimension Width/ Height/ Total depth 39,7 cm /89,0 cm /59,9 cm Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and moisture...
DRAINAGE WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. WATER SUPPLY 0.3-10 bar 1/2” 3/4” 3/4” 3/4” min.600 mm max.1000 mm The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm.
DISPLAY A. The time area: • : the programme duration • : the "finish in" time • : the alarm codes • : the message of error • : the programme is completed. B. The child lock indicator: • The indicator comes on when you activate this device.
Page 10
Programme Maximum load Programme description Default temperature Reference spin (Type of load and level of soiling) Temperature range speed Raikastus 20 ´min 1 kg A very short cycle for lightly soiled cotton and syn- 30 °C 1200 rpm thetic items or worn only once. 40°C - 30°C Mix 20°...
Page 11
Programme ■ ■ ■ ■ ■ ■ Mix 20° 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, syn- thetics and delicates: 1,5 kg.
Page 12
• Set this option to prevent the laundry creases. HUUHTELU • The related indicator comes on. With this option you can perform only a last rinse of • There is a water in the drum when the a selected washing programme. programme is completed.
• The appliance has a malfunction. If you deactivate the acoustic signals, To deactivate/activate the acoustic signals, they continue operate when the touch the buttons at the same time for 4 appliance has a malfunction. seconds. BEFORE FIRST USE 1. Connect the mains plug to the mains socket. During installation or before first use 2.
Page 14
Detergent compartment for prewash phase. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). The mark is the maximum level for the quantity liquid additives. ACTIVATING THE APPLIANCE 2. Touch the button Press and hold the On/Off button to activate or •...
2. Press the same button again to activate the • The indicator flashes to remind you to drain appliance. Now, you can set a new washing the water. programme. • The lid lock indicator is on. The indicator of Before starting the new programme button flashes.
HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash.
• With adequate pre-treatment, stains and limited Insufficient detergent may cause: soiling can be removed; the laundry can then be • unsatisfactory washing results, washed at a lower temperature. • the wash load to turn grey, • To use the correct quantity of detergent, refer to •...
DESCALING LID SEAL If the water hardness in your area is high or Regularly examine the seal and remove all objects moderate, we recommend that you use a water from the inner part. Clean it when needed, using descaling product for washing machines. ammonia cream cleanser agent without scratching the seal surface.
CLEANING THE INLET HOSE AND THE VALVE FILTER FROST PRECAUTIONS 5. Set any selected programme with option Tyhjennys & Linkous and let it operate until the If the appliance is installed in an area where the end of the cycle. temperature can be less than 0 °C, remove the 6.
Page 20
• Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this The appliance does not information, contact your local water authority. fill with water properly. • Make sure that the water tap is not clogged.
Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose have no dam- floor.
Page 22
The QR code on the energy label supplied with the appliance pro- vides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other docu- ments provided with this appliance.
Need help?
Do you have a question about the RTT7122N2 and is the answer not in the manual?
Questions and answers