Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KOVAX EMA-X 150/6
Summary of Contents for KOVAX EMA-X 150/6
- Page 1 150/6 ELECTRIC RANDOM ORBITAL SANDER INSTRUCTION MANUAL Art.No.: 910-0900...
-
Page 2: Table Of Contents
General Power Tool Safety Warnings Correct Usage Starting Up Accessories Assembly Starting and Stopping Electronic Controller Dust Extraction Noise Emission Values Vibration Emission Values Maintenance and Serving Cleaning Repairs Disposal version: 1.0 date of issue: 30/06/2022 revision date: PAGE 2 | EMA-X 150/6... -
Page 3: Parts Of The Tool
PARTS OF THE TOOL PAGE 3 | EMA-X 150/6... - Page 4 PARTS OF THE TOOL ITEM DESCRIPTION IDENTIFICATION PLATE ON/OFF BUTTON – LED INDICATOR START/STOP SWITCH LEVER SPEED REGULATION WHEEL BACKING PAD EXTRACTOR CONNECTOR 19 MM PAD WRENCH ANTI-SPINNING SLEEVE PAGE 4 | EMA-X 150/6...
-
Page 5: Eu Declaration Of Conformity
EU DECLARATION OF CONFORMITY Kovax Europe B.V. | 7602 KC Almelo | The Netherlands We declare on our responsibility that the represented tool is in conformity with the directives: 2006/42/CE, 2014/35/CE, 2014/30/CE, 2011/65/CE. The tests have been carried out in accordance with standard:... -
Page 6: Technical Specifications
R.P.M. 4.000 - 10.000 ELECTRONIC SPEED CONTROL POWER [W] INSULATION CLASS WEIGHT [KG] ACCORDING TO EPTA-PROCEDURE The values shown are based on a nominal voltage of 230V/50Hz. In case of voltages and frequencies of different power values may vary. Refer to the label technical specifications to the values of the tool. PAGE 6 | EMA-X 150/6... -
Page 7: Instruction Manual
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. PAGE 7 | EMA-X 150/6... -
Page 8: Correct Usage
This tool is designed to be used as a sander. Read all safety warnings, instructions, indications provided on drawings and specifications provided with this tool. Failure to comply with all instructions provided below may cause electrical shocks, fire and/or serious injuries. This tool is not intended to be used for metal brushing, polishing and cutting operations. The use of this tool for unintended applications may cause hazards and injuries to people. The tool must be used with accessories that have been specifically designed or recommended by the manufacturer. PAGE 8 | EMA-X 150/6... -
Page 9: Starting Up
WARNING: If a case of unusual vibration is present after a start of the tool, switch-off the tool immediately and eliminate the fault. WARNING: To reduce the risk of injury, turn off the tool by pressing the ON/OFF button (2) after any use. PAGE 9 | EMA-X 150/6... -
Page 10: Electronic Controller
WARNING: Dust can be hazardous to health. Always work with a dust extractor. Always read applicable nation regulations before extracting hazardous dust. The sander does not have the self-generated dust extraction. Connect a Kovax dust extraction system at the extractor connector (6). -
Page 11: Noise Emission Values
No other maintenance operations must be undertaken by the user. REPAIRS Maintenance and cleaning of the inner parts like ball bearings, gears etc. or others, must be carried out only by an authorized customer service workshop. PAGE 11 | EMA-X 150/6... -
Page 12: Disposal
The correct disposal of the product contributes to the health and preservation of the environment. Illegal disposal of the product will entail penalties against the offenders. PAGE 12 | EMA-X 150/6... - Page 13 Kovax Europe B.V. Bedrijvenpark Twente 49 7602 KC Almelo The Netherlands www.kovax.eu...
Need help?
Do you have a question about the EMA-X 150/6 and is the answer not in the manual?
Questions and answers