Green Audio HDS 4X1 User Manual

Green Audio HDS 4X1 User Manual

4x1 hdmi switcher with arc

Advertisement

Quick Links

User Manual
HDS 4X1
4x1 HDMI Switcher with ARC
HDS4X1_210601
GREEN AUDIO MANUFACTURING
SAVE TIME. HELP THE PLANET.
© 2021 Green Audio Manufacturing. All Rights Reserved
GreenAudioMfg.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDS 4X1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Green Audio HDS 4X1

  • Page 1 User Manual HDS 4X1 4x1 HDMI Switcher with ARC HDS4X1_210601 GREEN AUDIO MANUFACTURING SAVE TIME. HELP THE PLANET. © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 2 Green Audio was founded in 2016 with an eye toward reduced environmental impact and labour efficiencies. We’ve developed a growing line of products to help you enjoy your leisure time at home with minimal impact on our planet.
  • Page 3 HDS 4X1 The HDS 4X1 is a four input to one output HDMI switcher featuring uncompressed 4K60 4:4:4 video performance in an ultra slim chassis. The switcher supports built-in ARC processing and customizable EDID with IR control, RS232 control, and auto-switching.
  • Page 4: Fcc Statement

    This manual is only intended to provide installation and operation instruction. It is not intended for any maintenance or repair. © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 5: Safety Precautions

    • Unplug the power cord when left unused for a long period of time. • If disposing of the unit, do not burn or mix with general household waste. The device must be disposed of per local regulations for electronic recycling. © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 6 • 2x mounting ears • 1x RS232 cable (3.5mm to DB9) • 1x IR receiver • 1x IR remote • 1x power supply Please Recycle After installation please recycle any unused packaging. © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 7: Panel Descriptions

    Illuminates yellow in auto-switch mode ⑤ Input 1 - 4 LED • Illuminates green when there is an HDMI signal present on the corresponding channel ⑥ FIRMWARE • Micro-USB port for firmware upgrade © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 8: Rear Panel

    • DC port for connecting a 5V DC AC power adapter Note: Output HDCP compliancy status depends on the input signal. HDCP compliant sources will force HDCP compliancy on the output. © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 9: Typical System Diagram

    Central Control System Ray-Blu DVD Note: The HDS 4X1 should be powered off during the connection of HDMI sources and destinations. This helps the unit and sources best negotiate resolutions and HDCP compliancy. © 2021 Green Audio Manufacturing. All Rights Reserved...
  • Page 10: Operation

    • Connect a 3.5mm to DB9 RS232 cable to the 3.5mm RS232 port on the switcher. • Verify the control system is configured to the proper RS232 parameters: o Baud Rate: 9600 o Data bit: 8 o Stop bit: 1 o Parity bit: none © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 11 Open the menu setting >>SRCMenu >>SRCBack Go back >>SRCBack >>SRCOk Confirm (OK) >>SRCOk >>SRCExit Exit >>SRCExit >>SRCUp Up direction >>SRCUp >>SRCDown Down direction >>SRCDown >>SRCLeft Left direction >>SRCLeft >>SRCRight Right direction <<SRCRight © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 12 Select the HDMI audio input channel >>AUDInternal System Control Function Command Feedback Example System reset >>RESET >>RESET <<AUDExternal << WUH4ARC-H2 << V1.0.0 << -------- >>SYSInfo Get system information <<HDMI1 <<Auto Switch <<AUDExternal <<EDID0 © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 13: Edid Management

    Stereo User Defined EDID Setting • The HDS 4X1 supports five custom EDID modes that can be user defined and then invoked via the 4-pin dipswitch. Follow the below process to define the EDID modes. 1. Rename the user defined EDID according to the following format.
  • Page 14 1111 Firmware Upgrade The HDS 4X1 firmware can be upgraded using the below process. Please note you will need an upgraded copy of the firmware from the factory prior to this procedure. 1. Prepare the latest upgrade file (.bin) and rename it “USERAPP.bin”.
  • Page 15 • Please note, only the fourth HDMI input port features ARC. • The below application shows typical ARC functionality. Speakers ARC AUDIO: Speaker Amplifier IN 1 IN 2 IN 3 AUDIO RS232 IR IN EDID DC 5V © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 16: Troubleshooting

    Verify the IR cable is connected IR: improper cable connection properly Verify the unit is connected to a Static or unstable video image Poor or improper grounding grounded electrical outlet with a proper earth ground © 2021 Green Audio Manufacturing. All Rights Reserved GreenAudioMfg.com...
  • Page 17: Warranty And Service

    Installation specific wiring; c) malfunction resulting from abuse or misuse of the product; d) malfunction occurring after repairs have been made by anyone other than Green Audio or any of its authorized service representatives; e) acts of nature; f) lack of proper maintenance;...

This manual is also suitable for:

210601

Table of Contents