Related Manuals for Black & Decker BXWP62200
Summary of Contents for Black & Decker BXWP62200
- Page 1 INSTRUCTION MANUAL THERMOPLASTIC SUBMERSIBLE SUMP PUMP BXWP62200 BXWP62300 Customer Support (855-222-3033) customer.service@pedrollo-usa.com. Please read before returning this product for any reason.
-
Page 2: Table Of Contents
ENGLISH Index Content Page # Components Safety Guidelines Description Specifications Installation Operation Maintenance Troubleshooting Performance Parts Notes Warranty Components 1 Handle 2 1-1/4 in. (31.75mm) NPT Discharge 3 Motor 4 Base 5 Float Switch 6 1-1/4 in. (31.75mm) MNPT x 1-1/2 in. (38.1mm) MNPT or 1-1/4 in. -
Page 3: Safety Guidelines
ENGLISH Safety Guidelines Carefully read, understand and follow all safety WARNING: Don’t expose the pump to freezing instructions in this manual. Retain this manual for temperatures. Discharge lines exposed to freezing temperatures future reference. should be positioned with a downward slope to prevent freezing. This is the safety alert symbol. -
Page 4: Description
This sump pump is designed to remove ground water from residential sump pits. The motor is oil cooled and hermetically sealed. A float switch is provided for automatic operation and is equipped with a 10 ft., 3-prong grounding type power cord. Specifications BXWP62200 BXWP62300 Volts... -
Page 5: Installation
ENGLISH Installation Install new pump - Cont WARNING: Always disconnect the power source before attempting to install, service or perform maintenance on the 5. Test your installation after you have completed setting pump. Failure to do so may result in fatal electrical shock. up the pump. -
Page 6: Operation
ENGLISH Operation Maintenance WARNING: The pump motor is thermally protected. It is not WARNING: Risk of electric shock. Always disconnect recommended for pumping liquids over 120° F (48,9° C). The thermal the power supply before attempting to install, service or perform overload protector will automatically shut down the pump in an maintenance on the pump. -
Page 7: Troubleshooting
ENGLISH Troubleshooting Problem Possible Causes How To Correct Pump is not plugged in; switch Plug pump in or turn on switch/breaker or breaker is turned off Check for blown fuses or tripped circuit breakers or Replace fuse, reset circuit breaker, reset GFCI outlet tripped GFCI outlets If the pump does not start or run... -
Page 8: Performance
Height and/or piping restriction will reduce the pump output performance. It is recommended to use the same size or larger pipe as the pump discharge for optimum performance. 25ft / 7.62m 20ft / 6.1m Model Number BXWP62200 BXWP62300 15ft / 4.6m 10ft / 3.05m 5ft / 1.52m... -
Page 9: Parts
ENGLISH Replacement Parts For parts, contact customer support at 855-222-3033 or customer.service@pedrollo-usa.com. Reference Description BXWP62200 BXWP62300 Handle Assembly ABD300000 ABD300000 Shaft Seal C30010120 C30010120 Impeller 981040185 981040185 Gasket G81200134 G81200134 Base Assembly ABD300002 ABD300002 Adapter 981040005 981040005 Motor Housing *If motor fails, replace entire pump. -
Page 10: Notes
ENGLISH Notes:... -
Page 11: Warranty
ENGLISH Limited Warranty: General Terms and Conditions - Cont: Manufacturer warrants the products specified in this Warranty will be VOID if any of the following conditions are warranty to be free from defects in material or workmanship found: for one (1) year from date of purchase. During the Product is used for purposes other than those for which time period and subject to the terms and conditions, it was designed and manufactured. - Page 12 Customer Support (855-222-3033) customer.service@pedrollo-usa.com Manufactured Under License By: Pedrollo Group Inc. 45 Maryland Ave East St. Paul, Minnesota 55117 Copyright ©2022 BLACK & DECKER, BLACK+DECKER, the BLACK & DECKER and BLACK+DECKER logos and product names and the orange and black color scheme are trademarks of The Black & Decker Corporation and are used under license. Product may differ from that pictured.