Automatic Dialing
Storing names and telephone numbers
into navigator
For rapid access to frequently dialed numbers, the unit provides the navigator directory
(100 entries).
Press p repeatedly until the following
1
is displayed.
Display:
Press ( or ).
2
3
Enter the name, up to 10 characters (see
page 20 for instructions).
Example:
Press w.
4
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
G
If you want to enter a hyphen, press
k.
Press w.
6
G
To program other entries, repeat steps 3 to 6.
Press p to exit the program.
7
Helpful hint:
G
For your convenience, HELP-FAX (1-800-435-7329)
has been pre-programmed.
If you cannot solve a problem after trying the help
function (p. 9), call using this entry (p. 26).
If unnecessary, you can erase it (p. 25).
G
You can confirm the stored entries on the telephone
number list (p. 80).
24
directory!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
]
I H
NAME=
STORE:PRESS SET
NAME=Alice
STORE:PRESS SET
NO.=
NO.=5552233
REGISTERED
!
NAME=
STORE:PRESS SET
FLASH
(Hyphen)
Note:
When the following is displayed in step 6, you
G
can store only 5 more entries.
Display:
G
If there is no space to store new entries, the
following is displayed in step 6.
Erase unnecessary entries (p. 25).
G
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press ( or ) to move the cursor to the
G
incorrect character/number, and then make
the correction.
To delete a character/number
G
Move the cursor to the character/number you
want to delete, and press {.
MENU
SET
STOP
(Delete)
REGISTERED
SPACE= 5 DIRS.
REGISTERED
DIRECTORY FULL