2. MANUAL MODE
In manual mode, you can adjust the intensity and duration of exposure to active
oxygen and ultrasonic waves. To do this, in the corresponding menu item, you should
set the required values using the buttons
2.1. LAUNCHING
After setting the processing parameters, it is necessary to lower the device into water
with food, check the set values and press the START button. The indicator will turn
red, and the display will show the cleaning treatment being applied and the
remaining time. When nished, the indicator will turn green and the word FINISH will
appear on the display.
Attention! The water level in the container should not exceed the mark
as speci ed on the exterior of the device. Do not start the treatment process if the
device is not submerged in water!
14
and
and
.
.
MAX