BRC M500/14 Instruction Manual

M500/14
Instruction manual
Scope of
1x
delivery
M500/14

– Safety instructions for end users -

• Never carry out independent work on the M500/14 or open the housing for any reason.
• Do not allow unauthorized persons to enter the vicinity of the PV system or the Power Optimizer.
• Please keep the instruction manual for reference during all activities related to the product.
– Safety instructions for electricians –
• All work associated with the product may only be carried out by qualified electricians. The electrician must comply with national and regional regulations.
• Please read and follow all instructions carefully before installation. If there are any uncertainties or detailed information is required, please read the extended user
instructions or call our service telephone.
• Electrical work may only be carried out in compliance with the 5 safety rules of electrical engineering.
• To avoid burns, the electrician should wait a few minutes after switching off the system until the optimizers have cooled down sufficiently when dismantling or
replacing the M500/14.
• Install the M500/14 at a sufficient distance from the roof or other surfaces to ensure adequate heat dissipation.
• Only install intact M500/14 with a complete scope of delivery.
• Do not make any modifications to the M500/14.
• In particular, establish a solid electrical connection between the M500/14 and the modules and/or the PV string.
– General notes –
• The M500/14 may only be operated as intended and following the specified technical data.
• The reverse current flow of the Power Optimizer is excluded from the intended use.
Please observe all instructions provided by BRC Solar GmbH in the instruction manual and the warnings on the M500/14.
The warnings on the M500/14 must always be legible and not be removed, changed, or manipulated.
• Applicable local laws, regulations, directives, and standards must be observed as a priority for operation and during installation, uninstallation, and maintenance.
The safety instructions in the instruction manual are incomplete and only serve as a supplement.
Stand: 04.04.2023
Required
1x
accessories
Instruction manual
1x 1x
Flange nut M8 screw
Service:
+49 7243 924 1486
support@brc-solar.de
1 / 4