Fun Generation Mr. Beam 120 W User Manual
  1. Manuals
  2. Brands
  3. Fun Generation Manuals
  4. Light Fixture
  5. Mr. Beam 120 W
  6. User manual

Fun Generation Mr. Beam 120 W User Manual

Moving head
Hide thumbs
Table of Contents

Advertisement

Quick Links

Mr. Beam 120 W
Moving Head

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mr. Beam 120 W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fun Generation Mr. Beam 120 W

  • Page 1 Mr. Beam 120 W Moving Head...
  • Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 27.01.2023, ID: 528923 (V2)

  • Page 3: Table Of Contents

    7.4 Functions in 16-channel DMX mode..............20 7.5 Functions in 26-channel DMX mode..............22 7.6 Functions in 46-channel DMX mode..............24 Remote control........................26 Technical specifications....................27 Plug and connection assignments................29 Troubleshooting........................30 Cleaning............................ 31 Protecting the environment................... 32 Mr. Beam 120 W Moving Head...
  • Page 4 Mr. Beam 120 W Moving Head...

  • Page 5: General Information

    Text inputs that are carried out on the device are indicated by typewriter font. Example: 2323 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Mr. Beam 120 W Moving Head...
  • Page 6 Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone. Mr. Beam 120 W Moving Head...

  • Page 7: Safety Instructions

    If work has to be performed in the area of movement or in the near vicinity of the device, it must remain turned off. Mr. Beam 120 W Moving Head...
  • Page 8 The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt pads or similar. Mr. Beam 120 W Moving Head...

  • Page 9: Features

    For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. Mr. Beam 120 W Moving Head...

  • Page 10: Installation

    The ambient temperature must always be below 40 °C (104 °F). NOTICE! Possible damage caused by movements of the device Always ensure that enough space is free around the device for the movements of the head (pan, tilt). Mr. Beam 120 W Moving Head...
  • Page 11 Ensure that proper polarity is observed when inserting batteries. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period. Mr. Beam 120 W Moving Head...

  • Page 12: Starting Up

    Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so Mr. Beam 120 W Moving Head...

  • Page 13: Connections And Operating Elements

    12 Infrared sensor for receiving remote control signals 13 [Power Out] | lockable output socket (Power Twist) for powering a connected device 14 [DMX Out] | DMX output, designed as XLR panel socket, 3-pin Mr. Beam 120 W Moving Head...

  • Page 14: Operating

    Press [UP] or [DOWN] to select the various submenus within a menu level. Press [ENTER] to open the submenu shown on the display. Confirm the changed values with [ENTER]. To return to the next higher menu level, press [MODE]. The following table shows the setting options. Mr. Beam 120 W Moving Head...
  • Page 15 Display is dimmed after about 25 seconds ‘Key Lock’ Key lock 30 seconds after last keystroke ‘ON’ Switching on When the key lock is activated, press successively [MODE], [DOWN], [UP] and [ENTER] to unlock the keys. Mr. Beam 120 W Moving Head...
  • Page 16 Reverse of the prism ‘Record Scene’ Recording scenes ‘ShowMode’ ‘Yes ’ Recording a running scene. ‘No ’ Not recording a running scene. ‘RDM’ ‘Manufacturer ‘ID High’ Highest manufacturer ID ID’ ‘ID Low’ Lowest manufacturer ID Mr. Beam 120 W Moving Head...
  • Page 17 Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Device ID’ ‘ID High’ Highest device ID ‘ID Low’ Lowest device ID ‘RDM Mute’ ‘Yes’ Deactivating RDM ‘No’ Not deactivating RDM Mr. Beam 120 W Moving Head...

  • Page 18: Functions In 15-Channel Dmx Mode

    Colour effect 5 85…99 Colour effect 6 100…114 Colour effect 7 115…129 Colour effect 8 130…144 Colour effect 9 145…159 Colour effect 10 160…174 Colour effect 11 175…189 Colour effect 12 190…204 Colour effect 13 Mr. Beam 120 W Moving Head...
  • Page 19 Operating Channel Value Function 205…219 Colour effect 14 220…255 No function 0…255 Increasing running speed colour effect Mr. Beam 120 W Moving Head...

  • Page 20: Functions In 16-Channel Dmx Mode

    Colour effect 4 70…84 Colour effect 5 85…99 Colour effect 6 100…114 Colour effect 7 115…129 Colour effect 8 130…144 Colour effect 9 145…159 Colour effect 10 160…174 Colour effect 11 175…189 Colour effect 12 Mr. Beam 120 W Moving Head...
  • Page 21 Operating Channel Value Function 190…204 Colour effect 13 205…219 Colour effect 14 220…255 No function 0…255 Increasing running speed colour effect Mr. Beam 120 W Moving Head...

  • Page 22: Functions In 26-Channel Dmx Mode

    Movement pattern 1 70…129 Movement pattern 2 130…189 Movement pattern 3 190…255 Movement pattern 4 0…255 Increasing running speed movement pattern Colour effect 0…9 No function 10…24 Colour effect 1 25…39 Colour effect 2 Mr. Beam 120 W Moving Head...
  • Page 23 Colour effect 8 130…144 Colour effect 9 145…159 Colour effect 10 160…174 Colour effect 11 175…189 Colour effect 12 190…204 Colour effect 13 205…219 Colour effect 14 220…255 No function 0…255 Increasing running speed colour effect Mr. Beam 120 W Moving Head...

  • Page 24: Functions In 46-Channel Dmx Mode

    Intensity red head 3 0…255 Intensity green head 3 0…255 Intensity blue head 3 0…255 Intensity white head 3 0…255 Rotation (pan) head 4 (0° up to the maximum value of the pan range of 540°) Mr. Beam 120 W Moving Head...
  • Page 25 Colour effect 8 130…144 Colour effect 9 145…159 Colour effect 10 160…174 Colour effect 11 175…189 Colour effect 12 190…204 Colour effect 13 205…219 Colour effect 14 220…255 No function 0…255 Increasing running speed colour effect Mr. Beam 120 W Moving Head...

  • Page 26: Remote Control

    10 [SHOW] | calls up one of the preprogrammed automatic shows. Then press one of the number buttons [1] - [9] for the desired colour. To cancel a show, press [STAND BY]. 11 [SOUND OFF] | disables the sound control. Mr. Beam 120 W Moving Head...

  • Page 27: Technical Specifications

    Mounting options standing, hanging Dimensions (W × H × D) 1015 mm × 310 mm × 85 mm Weight 11.8 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Mr. Beam 120 W Moving Head...
  • Page 28 Technical specifications Further information Light source type Colour mixture RGBW Gobo wheel Prism Motorized focus Motorized zoom Mr. Beam 120 W Moving Head...

  • Page 29: Plug And Connection Assignments

    The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suit‐ able XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) Mr. Beam 120 W Moving Head...

  • Page 30: Troubleshooting

    DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Mr. Beam 120 W Moving Head...

  • Page 31: Cleaning

    Before cleaning, switch off the device and disconnect mains-oper‐ ated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. Mr. Beam 120 W Moving Head...

  • Page 32: Protecting The Environment

    Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Mr. Beam 120 W Moving Head...
  • Page 33 Notes Mr. Beam 120 W Moving Head...
  • Page 34 Notes Mr. Beam 120 W Moving Head...
  • Page 36 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents