Advertisement
H O W T O U S E F A Q
REGISTER YOUR DE VICE
Before first use, download the FAQ
these simple steps;
1. Download the FAQ
2. Log in to your existing account, or sign up for a new one.
3. Add device (on the top of your screen).
4. Choose the device series.
5. Press and hold the universal button to connect your device to the app.
6. Fill in the purchase information
And your device is ready to use!
HOW TO USE
1. Start with a clean and dry face, and apply your FAQ
Face Mask over your face, and secure in place with the headband.
2. Press the universal power button to turn on your mask. You can change the LED colors by quick-pressing the
button again.
3. Enjoy your LED facial treatment for up to 15 mins, while you continue with your day - for multitasking at its best.
Once finished, press the universal power button for 3 seconds to turn off your mask.
RECOMMENDED USE: 5-15 mins, 3-5 times per week.
CAUTION: Do not pull the headband too tight, or you may damage the silicone mask.
C L E A N I N G Y O U R F A Q
Always clean your FAQ
LED Mask thoroughly after use. For optimal results, we recommend spraying the mask
™
with FAQ
Silicone Cleaning Spray. Then wet a lint-free cloth or towel with warm water, and thoroughly wipe off all
™
remaining residue.
NOTE: Never use cleaning products containing alcohol, petrol or acetone, as they may irritate the skin and damage
the silicone.
T R O U B L E S H O O T I N G
Precautions to be taken in the event of changes in the performance of FAQ
If FAQ
201 is not activated when pressing the universal button:
™
• Battery is empty. Recharge using the USB charging cable for up to 2 hours until fully charged, and then restart your
device by pressing the universal button.
If FAQ
201 cannot be switched off and/or the universal button does not respond:
™
• Microprocessor is temporarily malfunctioning. Press and hold the universal button to restart the device.
If FAQ
201 won't sync to the FAQ
™
• Switch your Bluetooth off and then on again to try reconnecting.
• Close the FAQ
Swiss app and then reopen it to start the process over.
™
• Check to see if the app needs to be updated in your mobile device's app store.
2 0 1
™
Swiss mobile app to register your device and activate the warranty by following
™
Swiss app on your mobile phone by scanning the QR code.
™
primer, if desired. Then place your FAQ
™
2 0 1
™
Swiss app:
™
:
™
4
201 Silicone LED
™
Advertisement
