Download Print this page

Maintenance - Bratt Decor venetian BD-CV01-2 Manual

3-in-1 baby crib

Advertisement

FAiLuRE TO FOLLOw ThESE wARNiNGS AND ASSEMbLy iNSTRuCTiONS COuLD RESuLT iN SERiOuS iNjuRy OR DEATh.
* Read all instructions before assembling crib. KEEP INSTRUCTIONS, IN POUCH PROVIDED, FOR FUTURE USE.
* Infants can suffocate on soft bedding. Never add pillow or comforter. Never place additional padding under an infant.
* To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise
advised by your physician.
* Strangulation hazard: Strings can cause strangulation! Do not place items with a string around a child's neck, such as hood
strings or pacifierm cords. Do not suspend strings over a crib or attach strings to toys.
* To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
* DO NOT place crib near window where cords from blinds or drapes may strangle a child.
* Fall hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
* Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm).
* Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before
and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts
are missing, damaged or broken. Contact Bratt Decor, Inc. for replacement parts and instructional literature if needed.
DO NOT substitute parts.
* If refinishing, use a non-toxic finish specified for children's products.
* Follow warnings on all products in a crib.
* Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
* Infants can suffocate in gaps between crib sides and a mattress that is too small.
ANy MATTRESS uSED iN ThiS CRib MuST
bE AT LEAST 27 1/4 by 51 5/8 iNChES wiTh
A ThiCKNESS NOT EXCEEDiNG 6 iNChES.
Once a week inspect the crib for any damaged hardware, loose joints, missing parts or sharp edges.
Securely tighten and maintain all loose bolts and fasterners. Discontinue using the crib if any parts are missing or broken,
Cleaning: If crib is dirty, wipe with a cloth dampened with warm water. Do not use solvents.
warning: If this crib is not purchased new, do not use it until you have contacted Bratt Decor, Inc.
Place these assembly instructions and the hex tool in the bag provided on the mattress support.
You will need these assembly instructions every time you assemble this crib.
Parent should ensure a safe environment for the child by checking regularly, before placing the child in the product,
B r a t t D e c o r , I n c .
wARNiNG:
CAuTiON:

MAiNTENANCE:

contact Bratt Decor, Inc. for replacement parts if needed.
Storage: Store in a dry place.
to find out if the crib conforms to the current safety standards.
that every component is properly and securely in place.
P . O . B o x 2 0 8 0 8
B a l t i m o r e , M D 2 1 2 0 9
1 8 8 8 2 4 B R A T T

Advertisement

loading